High Quality FRP Plastic Warning Signs Post

Production Description


We offer a wide range of pultrusion products for the Pultrusion process. Pultrusion is a continuous, automated closed-moulding process that is cost effective for high volume production of constant cross section parts. The basic process usually involves pulling of continuous fibers through a bath of resin, blended with a catalyst and then into pre-forming fixtures where the section is partially pre-shaped & excess resin is removed. It is then passed through a heated die, which determines the sectional geometry and finish of the final product

Due to uniformity of cross-section, resin dispersion, fiber distribution & alignment, excellent composite structural materials can be fabricated by pultrusion. The profiles produced with this process can compete with traditional metal profiles made of steel & aluminium for strength & weight.

By using various additives, liquid resin systems can be made suitable to provide specific performance. Alumina trihydrate is filler that is used for its ability to suppress flame and smoke generation. Special purpose additives include ultraviolet radiation screens for improved weatherability, antimony oxide for flame retardance, pigments for coloration, and low-profile agents for surface smoothness and crack suppression characteristics.

Our factory produces standard FRP profiles, such as: rectangular tube, square tube, round pipe, gear, bars, U profiles, I profiles, window profiles, angle profiles and sheet, etc and profiled bar for clients' customization.




We are 14 years of experience in FRP production, and export experience for 5 years:



Qinhuangdao Shengze New Material Technology Co.,LTD. formerly is Qinhuangdao HaoTian fiberglass reinforced plastic Co.ltd,was estabilished in 1993. 

Shengze is a leading and profession manufacturer of fiberglass products for over 20 years. 

The main products are various kinds of frp pultrusion profiles, SMC products , FRP hand lay out product and vacuum infusion products. The annual production capacity is about 8,000tons. 

ShengZe with complete sets of professional equipment from fiberglass raw material manufacturing to after treatment. There are 10 advanced frp pultrusion production lines, SMC production line, special frp hydraulic equitment from 100tons-3000tons, RTM production lines and test machine etc. 

With decades of experience and performance based on excellent technology and dedication to the top quality standards in manufacturing and customer satisfaction. ShengZe ensures our solutions are the most innovative and cost effective ones. 

As an ISO accredited Company, Shengze shows committed to quality, customer and a willingness to improve efficiency. 

Shengze FRP products have exported to South Asia, Middle Asia and Middle East, Europe , American and got high praise. 

We sincerely welcome guests from domestic and abroad to visit and cooperate with us!


Contact US:
For FRP products, if you have any questions please feel free to contact me, I will make professional solutions for you in time. 

I am Antony
 
Tel:+86 13931334932 Production Description


We offer a wide range of pultrusion products for the Pultrusion process. Pultrusion is a continuous, automated closed-moulding process that is cost effective for high volume production of constant cross section parts. The basic process usually involves pulling of continuous fibers through a bath of resin, blended with a catalyst and then into pre-forming fixtures where the section is partially pre-shaped & excess resin is removed. It is then passed through a heated die, which determines the sectional geometry and finish of the final product

Due to uniformity of cross-section, resin dispersion, fiber distribution & alignment, excellent composite structural materials can be fabricated by pultrusion. The profiles produced with this process can compete with traditional metal profiles made of steel & aluminium for strength & weight.

By using various additives, liquid resin systems can be made suitable to provide specific performance. Alumina trihydrate is filler that is used for its ability to suppress flame and smoke generation. Special purpose additives include ultraviolet radiation screens for improved weatherability, antimony oxide for flame retardance, pigments for coloration, and low-profile agents for surface smoothness and crack suppression characteristics.

Our factory produces standard FRP profiles, such as: rectangular tube, square tube, round pipe, gear, bars, U profiles, I profiles, window profiles, angle profiles and sheet, etc and profiled bar for clients' customization.




We are 14 years of experience in FRP production, and export experience for 5 years:



Qinhuangdao Shengze New Material Technology Co.,LTD. formerly is Qinhuangdao HaoTian fiberglass reinforced plastic Co.ltd,was estabilished in 1993. 

Shengze is a leading and profession manufacturer of fiberglass products for over 20 years. 

The main products are various kinds of frp pultrusion profiles, SMC products , FRP hand lay out product and vacuum infusion products. The annual production capacity is about 8,000tons. 

ShengZe with complete sets of professional equipment from fiberglass raw material manufacturing to after treatment. There are 10 advanced frp pultrusion production lines, SMC production line, special frp hydraulic equitment from 100tons-3000tons, RTM production lines and test machine etc. 

With decades of experience and performance based on excellent technology and dedication to the top quality standards in manufacturing and customer satisfaction. ShengZe ensures our solutions are the most innovative and cost effective ones. 

As an ISO accredited Company, Shengze shows committed to quality, customer and a willingness to improve efficiency. 

Shengze FRP products have exported to South Asia, Middle Asia and Middle East, Europe , American and got high praise. 

We sincerely welcome guests from domestic and abroad to visit and cooperate with us!


Contact US:
For FRP products, if you have any questions please feel free to contact me, I will make professional solutions for you in time. 

I am Antony
 
Tel:+86 13931334932

Step Stool - Steps Ladder

Step stool- It`s also named Steps ladder-Home using ladder .It`s be loved by buyer of lightweight and portable design . Easy to extend and fold , take less space in anywhere.Aluminum step stool , you use it as stool , just sit down on it looks so modern different from traditional`s . The steps stool can load 150kgs with EN131 standard .

Choose the Step stool without hesitation as it would be the most convenient assistant for your life .

More details as follows :

FAQ:

Q: Are you factory or trading company ?

A: We are factory , exported foreign over decade with rich experiences .

Q: We can change the color of the rubber cover ?

A: yes , the regular is black , you also choose other color .

Q:What`s the MOQ ?

A: 50 PCS.

Q: Can I have a sample ?

A: It`s ok .

Q:What`s your price ?

A: It`s depends on your demands, quantity , we can offer you lowest price .

Q:What`s your delivery time ?

A: Sample order : 3days , bulk order : 23-25days .

Q: Can we use our logo or brand on the package ?

A: yes , OEM is ok .

Q: What`s the payment :

A: (1) T/T: 30% deposit be paid in advance , the 70% of total payment see the copy of B/L.

(2) L/C it`s ok

  (3) Cash also ok .

 

 

More inquires or questions , plz feel free to contact us !

Step Stool

Aluminum Step Stool,Folding Step Stool,Fold Step Stool,Ladder Step Stool

Yongkang Aoyi Industry&Trade Co., Ltd. , https://www.aoyiladder.com