When the magnetic separator works, the powder falls from the discharge port of the distributor to the magnetic cylinder. With the rotation of the magnetic cylinder, the powder enters the magnetic field of the magnetic cylinder, and the non-magnetic mineral is affected by inertia and gravity. The tangential direction of the front end of the magnetic separation zone is thrown by centrifugal force, and the iron-removed product can be obtained through proper separation of the partition plates. Under the action of magnetic force, the oxides of iron and iron gradually leave the field of magnetic field along with the magnetic cylinder, and the iron and iron oxides fall into the collecting hopper to collect, thereby realizing the whole process of removing iron. After the magnetic separation by pre-stage, the non-magnetic material after de-ironing is dropped into the second-stage magnetic cylinder for sorting again, so after repeated one to three strong magnetic separation purification, more than 99% of iron and iron oxides are separated. Collection, so that the product quality of concentrate powder fully meet the required indicators.
Aluminum screening machine technology is to burn the water temperature to 100 degrees (raw material) through high temperature through the separation box and put it here (soaking) for about 30 minutes. It begins to loosen, release it and then put it into the screening machine in the screening machine. Inside through the rotation screen of this machine, the aluminum was screened out. This side is where the aluminum out of this side has a plastic out. The plastic side is all out.
Ball Valves,Flange Type Ball Valve,Flanged Ball Valve,Platform Flanged Ball Valve
ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztongvalve.com