Second, prolong the time of spraying the foliar fertilizer and moist leaves. The longer the leaf surface is wetted by the foliar fertilizer, the stronger the adhesion of the foliar fertilizer on the leaf surface, and the higher the leaf surface absorption rate. The wetting time is generally required to be in the range of half an hour to one hour. In order to achieve this requirement, a moistening agent (neutral detergent, concentration of 0.1% to 0.2%) is added to the foliar fertilizer when spraying the fertilizer to lower the water. Surface tension increases the adhesion of the solution to the foliage. Some leaves have a waxy layer on the surface, which is not conducive to the wet leaf surface and absorption of the solution, so spraying on the back of the leaf is also better.
3. Mixing with urea When different fertilizers are dissolved in water, the penetration force into the leaves is different, while the effect of fertilization outside the roots is different. Generally, urea has the best osmosis effect, and urea is a neutral fertilizer. It has little damage to stems and leaves. Mixing urea and other fertilizers can improve the ability of other fertilizers to penetrate the foliage and improve the spraying effect. However, it is forbidden to use this method in the long cotton fields.
4. Note that the mineral elements with different parts and times of spraying have different ability to move in the plant, so the number and location of spraying should be different. For some mineral elements with poor mobility, attention should be paid to spraying on the parts requiring fertilizer, such as cotton supplementing iron, which should be sprayed on young leaves, and the number of fertilization should be increased appropriately. Elements that are highly mobile (such as potassium) can be sprayed to increase the absorption area. It should be noted that if it rains within 24 hours after spraying, it needs to be re-sprayed. Generally, 169 square meters of foliar fertilizer containing mineral nutrients is sprayed 60-75 kg, and sprayed 2 to 3 times.
V. Reasonable concentration of spray solution In actual production, most cotton farmers tend to make the concentration of foliar fertilizer too high. Production practices have proven that foliar fertilizer concentrations are too high or too low to be unreasonable. The scientific and reasonable preparation concentration is: urea 1% to 2%, potassium hydrogen phosphate 0.2% to 4%, superphosphate 2% to 4%, diammonium phosphate 1% to 1.5%, zinc sulfate 0.1% to 0.2%, chlorine Potassium or potassium sulfate is 1% to 1.5%, and iron sulfate is 0.05% to 0.3%.
6. Choose the appropriate time for the external top dressing. For the cotton with the tendency of de-fertilization and premature aging, spray 1% to 2% of the urea aqueous solution. For the cotton with strong growth, spray 2% to 3% of the superphosphate. An aqueous solution or 800 to 1000 times potassium dihydrogen phosphate. The time of fertilization outside the root generally ends from the beginning of July to the middle of August, and is sprayed 2 to 3 times according to the growth of the cotton plant. The spraying time is usually in the morning or evening, or it can be sprayed on a rainless cloudy day to extend the liquid.
7. When the external spray fertilizer is to be sprayed evenly outside the root, the spray surface should be as uniform as possible, avoid leakage and re-spray. If the cotton root fertilization is carried out according to the above method, it can really exert the effects of less fertilizer, high fertilizer utilization rate, quick effect, etc., and thus obviously increase cotton yield.
Huaxian Liu Huimin
In the penetrating type, the stunner uses a pointed bolt which is propelled by pressurized air or a blank cartridge. The bolt penetrates the skull of the animal, enters the cranium, and catastrophically damages the cerebrum and part of the cerebellum. Due to concussion, destruction of vital centres of brain and an increase in intracranial pressure, the animal loses consciousness. This method is currently the most effective type of stunning, since it physically destroys brain matter (increasing the probability of a successful stun), while also leaving the brain stem intact (thus ensuring the heart continues to beat during the bleed. This however has no bearing on the efficacy or speed of the bleed, as cardiac output requires a venous return, as venous supply is severed, this does not occur. The bleed hence relies on gravity and not a heartbeat). One disadvantage of this method is that brain matter is allowed to enter the blood stream, possibly contaminating other tissue with bovine spongiform encephalopathy (BSE, colloquially known as mad cow disease).
Captive Bolt Stunner,Captive Bolt Stunner Kit
Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com