The "White Paper on China's Laminated Timber Flooring Consumption" issued jointly by the Flooring Committee of the China Forest Products Industry Association and the Consumer Guiding Working Committee of the China Consumers Association pointed out that the hardwood flooring should be durable and require surface abrasion resistance, density, static bending strength, and moisture content. And other 17 physical and chemical performance indicators. When consumers buy floorboards, they must understand each indicator very clearly and more difficultly. After consultation with the experts on the floor of the Holy Scriptures, consumers can focus on the following three criteria, so they can avoid detours and can easily purchase and use them. floor.
Surface abrasion: The higher the abrasion resistance level, the less likely the floor will scratch the surface and the longer the service life. The surface of the laminate flooring is a layer of aluminum oxide wear-resisting layer that cannot be repaired once it is destroyed, and the floor is also declared obsolete. The quality of the wear layer is not measured in terms of thickness, but is determined by the content and purity of aluminum oxide per square meter. The national standard stipulates that the level of wear of households using floors must be AC3 (more than or equal to 6,000 rpm), and public places must use AC4 (more than or equal to 9,000 rpm). Therefore, when purchasing laminate flooring, do not overlook the level of wear on the floor surface due to price factors.
Formaldehyde release limit: According to the national standard 18580-2001, the formaldehyde release limit of laminate flooring must reach E1 level, that is, the formaldehyde emission is less than or equal to 1.5mg/L (dryer method). This is the most basic requirement and products that meet this standard can be safely used in an indoor environment. At present, the international adoption is a higher environmental protection standard E0, that is, formaldehyde emission is less than or equal to 0.5mg/L. At present, the health floor has become the mainstream of consumption. In the year of 2004, Shengxiang built a healthy substrate production line. The average floor formaldehyde emission limit of the produced floor substrate is less than or equal to 0.5mg/L, and the floor is healthy from the inside to the surface.
Installation standards: Three points seven floors installed. In the past, there were no specific regulations for floor installation. This year will be the normative year for the wood floor covering market. The national standard is "Wood floor pavement specification" GB/T20238-2006 and the Ministry of Construction "Wood floor pavement technical specification" (CECS191:2005 ) has been introduced at the same time, will make the wood flooring shop with a chapter to follow. The first batch of St. John's floor installation technicians will continue to hold certificates through the training and examinations of the Ministry of Construction, the China Forest Products Industry Association, and the China Engineering Construction Standardization Committee.
Nature Floor Del Floor Formaldehyde
We are 10mm Blue Through-hole LED(DIP LED)
For the raw materials, we use the LED chip from Taiwan Epistar, Tyntek, Optotech. The stability of our products have been recognized by all of our custom.
We supply kinds of 10mm Through-hole LED with different wavelength from 365nm to 1550nm, which include the visible LED and the invisible LED.
In this catalog, we mainly introduce the 10mm blue Through-hole LED.
For the bringhtness of 10mm blue through-hole LED, we have three level: common bright 10mm blue through-hole LED, super bright 10mm blue through-hole LED and ultra bright 10mm blue through-hole LED.
For the angle of 10mm blue through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.
10mm Through-hole LED, we supply 10mm blue LED with water clear lens, 10mm blue LED with diffused lens, 10mm blue LED with blue clear lens and 10mm blue LED with blue diffused lens. In addition, the shape can be 10mm round LED without flange(fringe), 10mm short head LED, 10mm bullet top blue LED, 10mm round blue LED with flange ect.
10mm blue Through-hole LED widely used for blue sign, display LED, indicator LED, die hole LED and 10mm round blue with lamp holder because of the high brightness and the small size.
10mm Blue Through-Hole LED, Super Bright 10mm Through-Hole LED, Oval Through-hole 10mm LED, Square Blue Through-Hole LED
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com