On the occasion of the National Day and the Mid-Autumn Festival, the Beijing border inspection police reminded the majority of outbound travelers that they must take care to keep their passports and other valid entry and exit documents properly during their travel abroad. If a passport or other valid documents are lost or stolen abroad and cannot be used, you must promptly report the loss to the embassy or consulate of the People ’s Republic of China or other agencies abroad entrusted by the Ministry of Foreign Affairs and apply for the Chinese people. Republic Travel Permit to avoid delay in returning to China. It should be specially reminded that passports and other documents are deemed invalid as soon as they are reported, and can no longer be used as valid entry and exit documents. However, if the lost certificate is accompanied by a valid visa, it can be used in combination with the new certificate after applying for the new certificate.
Recently, a case occurred in the Capital Airport where passengers were blocked from entering the country with their lost passports. During his travels in seven European countries, passenger Gao found that his passport could not be found. In order to return home smoothly, he went to the Chinese embassy to report the passport loss and applied for a travel permit of the People's Republic of China in accordance with relevant regulations. But when he sorted his luggage before returning to China, Gao accidentally found a passport that had been reported lost in his luggage. Because he didn't know much about the country's immigration policy, Gao still used the lost passport at the Capital Airport for immigration. When inspecting Gao's passport, the border policemen found that the document had been declared invalid, and they kept Gao at the port according to law. After some detailed inquiries and inspections, the border policemen understood the original situation of the matter, verified the identity of Gao Mou, and approved the customs clearance after going through the relevant procedures, but confiscated his lost passport according to law.
Related laws and regulations:
1. Article 16 of the "Passport Law of the People's Republic of China" stipulates that if the passport holder loses the nationality of the People's Republic of China or the passport is lost or stolen, the passport issuing authority shall declare the passport invalid. Passports that are forged, altered, defrauded, or declared invalid by the issuing authority are invalid.
2. Article 23 of the "Passport Law of the People's Republic of China" stipulates that citizens who go abroad for a short period of time should lose their passports, stolen or damaged passports abroad, and should entrust to the embassy or consulate of the People's Republic of China abroad or other matters entrusted by the Ministry of Foreign Affairs. Foreign agencies apply for travel permits of the People's Republic of China.
The structure of the core barrel is generally divided into single - acting double core tube and most of the fishing apparatus. The double tube section consists of an outer tube assembly and an inner tube assembly. The outer pipe assembly includes; The main structure and working principle of the cartridge stopper, cartridge chamber, stable joint outer pipe, diamond reamer and diamond bit are as follows:
(1) Spear structure is composed of spear head and recovery spring. When coring, the fishing device is lowered to the upper part of the inner tube assembly in the drill pipe, and the fishing hook grasps the fishing spear, lifts the fishing device up, picks up the recycling card barrel, and inwardly compressing the cartridge card, so that the inner tube assembly and the outer tube are separated, so that the inner tube assembly is lifted up.
(2) The clip structure is mainly composed of the clip frame, clip, spring and other components. Its function is that when the inner tube sits on the outer tube, the clip expands with the help of the elastic force of the expansion spring and sticks to the inner wall of the clip chamber, so that the drilling tool can achieve positioning.
(3) Buffer structure by spring, locking mother, split pin composition. Protecting the inner tube when pulling the core.
(4) Single action structure is realized by two pairs of thrust bearings.
(5) Adjust the length of the inner pipe assembly and the outer pipe assembly of the structure, and fine-tune the lower shaft and the locking mother to achieve the gap required by the end of the spring seat and the step inside the drill bit.
(6) The fishing structure, also known as the fishing device, is mainly composed of fishing hook, hammer and safety rope. The fishing hook is used to hold the spearhead while fishing the inner pipe, and the weight is used to speed up the fishing device's descent to save fishing time. The safety rope is a thin rope. When the inner pipe is stuck for some reason and cannot be lifted, the safety rope can be forcefully lifted and then the drill can be lifted.
Other Parts,Spearhead Base,Compression Spin,Core Lifter
wuxi shengmeirun trading co.,ltd. , https://www.smrxz.com