Recently, the Cambodian Ministry of Industry and Vocational Training (MOL) notified the Cambodian footwear industry, textile industry affiliates, employers, laborers, and labor unions to raise the minimum wage for workers.
Cambodia will raise the minimum salary on October 1 this year. The new salary will increase the minimum wage for labor trials (1-3 months) to 56 US dollars (including a minimum wage of 45 US dollars, a raise of 5 US dollars, and a living Allowance $ 6).
Regular workers are raised to a monthly minimum wage of 61 U.S. dollars (including a minimum wage of 50 U.S. dollars, a salary of 5 U.S. dollars, and subsistence allowance of 6 U.S. dollars).
The announcement stipulates that labor wages are paid according to the actual production of labor. If the actual production of labor exceeds the above-mentioned minimum wage, their wages will be paid according to their excess output, but the actual production of labor is lower than the minimum For wages, employers should also pay a minimum wage of $56 for workers (trial period) and a formal minimum wage of 61 workers.
Although there are many types of tapping screws, they all have the following similarities:
(1) are generally made of carbonized carbon steel (accounting for 99% of total production). It can also be made of stainless steel or non-ferrous metals.
(2) The product must be heat treated. Carbon steel tapping screws must be carbonized and stainless steel tapping screws must be solution hardened. In order to make tapping screws to meet the requirements of the standard of mechanical properties and performance.
(3) The product surface hardness is high, the core toughness is good. That is, "soft inside strong outside". This is a major feature of tapping Screw performance requirements. If the surface hardness is low, it can not be screwed into the matrix; If the core toughness is poor, a twist will break, can not be used. So "inside soft outside steel" is self-tapping screw to meet the use of performance, very important requirements.
(4) The surface of the product needs surface protection treatment, generally electroplating treatment. Some product surface must be treated by phosphate (photostatting), such as wall panel self - tapping screws for photostatting.
(5) Production by cold heading process. It is recommended to use high-speed cold heading machine and high-speed wire rolling machine or high-speed planetary wire rolling machine. High speed is emphasized here to ensure product quality. Only the head of tapping screw produced by high-speed machine is well formed and the thread quality is high.
Round head Tapping screw,hex tapping screw,flat head tapping screw,pan head tapping screw,truss head tapping screw
Shenzhen Lanejoy Technology Co.,LTD , https://www.brassinsert.net