Process Name - Specific Practices and Requirements - Reference Usage
Undercoat
1. Mix with solvent-based epoxy one-component primer or solvent-free epoxy primer (primary paint: curing agent = 5:1) and mix well;
2. Apply evenly with a roller and a brush, without leakage. 0.15-0.2Kg/m2
Putty layer 1. Use solvent-based epoxy paint (1:1) or solvent-free epoxy paint (5:1) to mix in proportion and add appropriate amount of filler (such as quartz powder, talcum powder) to stir evenly;
2. Use a batch of knives to 1-2 times, the focus is to fill the pit defects on the ground;
3. After curing, grind the defects such as the knife marks, and clean them with a vacuum cleaner, feather duster, wrung wet towel, etc. 0.3 kg/m2
Topcoat 1. Mix in a solvent-based epoxy topcoat (1:1) or solvent-free epoxy topcoat (5:1) and mix well;
2. Dip the varnish with the prepared roller and roll evenly. The coating is required to be uniform, no leakage coating, and roller coating twice. 0.25-0.30 kg/m2
Wear layer 1. This process can be selected according to the needs of users;
2. After 12-24 hours of construction, it will be cured until the pedestrians leave the imprint, and then sprayed with epoxy wear-resistant layer paint to greatly improve the floor finish and durability. 0.12 kg/m2
Oily floor maintenance
Daily cleaning can be cleaned with a soft broom or rag; use a neutral detergent when it is seriously contaminated, wash with a rag, then wash with water, dry thoroughly, and apply a thin layer of wax; when the floor spills with chemicals such as acid and alkali, it should be washed with water in time. Spilled with seasonings, oil, etc., wipe with a rag; smooth coating can be regularly maintained with bright wax to maintain the long-lasting appearance of the floor.
Mutrade car parking tower, ATP series are a type of automatic tower parking system, that is made of a steel structure and can store 20 to 70 cars at multilevel parking racks by using high speed lifting system, to extremely maximize the usage of limited land in downtown and simplify the experience of car parking. By swiping IC card or inputting the space number on operation panel, as well as shared with information of parking management system, the desired platform will move to entrance level of the parking tower automatically and quickly.
Up And Down Cross Moving Type,Up Cross Moving Type,Down Cross Moving Type,Up Down Cross Moving Type
Taiyaun JDS Machinery And Equipment Co., Ltd. , https://www.ccagoods.com