Solid wood flooring is a floor decoration material formed by drying and processing natural wood. Its soft and natural color and its warm winter and cool summer make it the darling of the decoration industry. Many families will choose the solid wood floor to decorate. However, with a seven-point installation on the three-point floor, no matter how good the floor material is, it must be carefully installed. If the floor is not properly laid, the utility will be halved. The paving method of solid wood flooring is very particular. Improper laying will bring a lot of problems to the family. Xiao Bian will organize some improper laying methods. We must avoid these problems when we shop!
Statistics from relevant departments show that solid wood flooring has problems in actual use, over 50% is due to improper laying, and only 5% belongs to the floor itself. It can be seen that whether the laying process is reasonable or not is the most important factor that affects the effectiveness of the floor. Experts advise you that you should avoid the following mistakes.
1. The ground is uneven: The unevenness of the ground will cause some floors and keels to hang and it will sound when stepping on.
2. The keel has not been dried: the moisture content of the undried wood keel is usually around 25%, and the qualified wood flooring moisture content is generally 12%. The humidity difference is too short to make the wooden floor absorb moisture quickly, causing the floor to arch and paint. Face burst. It is the usual practice of the current decoration team to lay the floor first and then perform Other construction on the floor. However, after the floor is laid, it often takes a month or more before it can be polished. During the period, there were no isolation measures for water vapor and chemicals on the floor and surrounding environment, which may cause the wooden floor to be deformed and cracked due to the rapid change in water content.
3, assembly too loose or too tight: wood flooring with the temperature and humidity changes in the environment, there will be expansion or contraction phenomenon. Therefore, when laying the floor, the tightness of the assembled wooden floor should be reasonably arranged according to the ambient temperature and humidity of the place of use. If it is too loose, there will be a large gap in the floor contraction. When it is too tight, the floor will arch when it expands.
4. Fixing method using wooden wedges and nails: The use of wooden wedges and iron nails in the construction will cause the nails to be insufficient due to the small contact surface between the wooden wedges and the nails. This can easily cause wooden keels. Loosen, there will be noise when treading on the floor
5, keel is too thick: the size of the keel wood can not be too thick, otherwise it will affect the space utilization.
6, cement nails: can not use cement nails, but should use electric hammer drill with wooden wedges, screws into the ground 2.5cm.
7. Cement mortar: After the keel is installed, it will not move around and it will not need to be fixed with cement mortar around it. This will prevent the arching or tile deformation of the floor due to insufficient maintenance time.
8, plywood size: For home installation should use 300px-450px plywood, and to be divided into 4-6 blocks, real keel, plate around the nail.
Editor's summary: The above is the common solid wood flooring laying error, in the process of laying solid wood flooring must pay attention to, if there are questions in doubt, it is best to consult a professional or floor business, laying this mark must be good, so as not to Problems arise in the future use, and it will be quite troublesome to solve them later.
Solid wood floor natural floor del floor paint
Floorstanding Bathtub Faucet,Floor Stand Faucet,Bathtub Faucet Tap,Bathtub Faucet Brass
kaiping aida sanitary ware technology co.,ltd , https://www.jmkpaidafaucets.com