The sound insulation indicator is a very professional number. It is not too big for the merchants to say, so it is very practical to learn a way to check the sound insulation of the wooden door. The following three detection methods are the recommended detection methods for ordinary consumers, and are short and fast detection methods based on the characteristics of wooden doors on the market.
How to detect the sound insulation of doors and windows
1. Look at the weight. The formula of sound insulation is directly related to the density of the material, so the sound insulation with high density is relatively good, and the molded door is relatively light, which is the source of poor sound insulation of the molded door. But note: the soundproof cotton in the middle of the flat hollow door will be more soundproof than the solid wood door.
2. Look at the thickness of the wooden facade laminate. The thicker the surface layer, the better the sound insulation effect. The general laminate of the wooden door should be 8mm thick. The thickness of the surface layer is also good, but the cost is increased. However: the iron surface of the iron plate fire door is 3mm thick, and the sound insulation effect is also good.
3. Look at the flatness of the wooden door. The flatter the wooden door, the better the combination with the door cover, regardless of the structure.
There is also a slightly more professional, the quality of the expansion glue between the door cover and the wall. If this is not good, it will seriously affect the sound insulation.
Note: In fact, the sound insulation of the door and window industry is the same as that of the fire door, not a single item. The concept of "sound insulation" and "sound absorption". The principle of sound insulation depends on the quality or the density of the material (when the overall weight of the iron door is smaller than the wooden door per unit area, its sound insulation is not as good as the wooden door), and the sound absorption depends on the fine surface area of ​​the material and the uneven surface. Space (rock wool, mineral wool, and foam are all sound absorbing materials rather than soundproofing materials).
LED Flood Light
LED Flood Light use high-performance integrated multiple LEDs of more than 1 watt, and use multiple lamp beads when focusing on luminous efficiency. Red, green, blue, yellow, white and other colors are available. LED is green and environmentally friendly and pollution-free: cold light source design, no heat radiation, no harm to eyes and skin.
Our other products range:LED Underground Light, LED Underwater Light, LED Wall Washer Light, LED Linear Light , LED Outdoor Flood Light, LED Garden Light , LED landscape light , LED Strip Light , LED Step Light etc.
Humanized structure design makes installation and maintenance of lamps easier. The installation angle can be adjusted between -45°~75°, suitable for a variety of installation methods, mainly used for tunnel lighting, outdoor flood lighting, architectural decoration lighting, industrial lighting, sports centers and outdoor stadiums, ports, docks, etc.
LED Flood light,Outdoor IP67 Flood light,Waterproof Flood light,IP67 Flood light.Garden Flood light
SHENGYA LIGHTING TECHNOLOGY CO., LTD. , https://www.syalighting.com