Profiled steel sheets are usually classified according to the application site, plate height, lap joint structure, and material. The common classification methods are as follows:
(1) According to the application part classification - divided into roof panels, wall panels, floor panels and ceiling panels. In the use, the color steel plate is used as the wall decoration board, and the architectural decoration effect is relatively novel and unique.
(2) According to the wave height classification - divided into high wave plate (wave height ≥ 70mm), medium wave plate and low wave plate (wave height <30mm)
(3) According to the material classification of the substrate - divided into hot-dip galvanized substrate, hot-dip aluminum zinc and hot-dip galvanized aluminum substrate.
(4) Classification according to the seam structure - divided into lap joint, undercut and buckle structure. The middle and high wave plates with undercut and buckled should be used as roof panels with high waterproof requirements; the galvanized plates with spliced ​​middle and high wave plates are used for floor coverings; the lapped low wave plates should be used as wall panels.
Many plastic extruded corrugated sheets have emerged, both transparent and opaque, and multi-layer composite hollow. Because of its good plasticity, it can better adapt to the requirements of various architectural shapes.
Dozer Parts,Bulldozer Spare Parts,Caterpillar Dozer Parts,Aftermarket Dozer Parts
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.sdkomatsudozerparts.com