Tri-roller gate intelligent system

First, the scope of application:

Triple-stick performance enables easy-to-dissuade access control of public channels. The mechanical part of the equipment includes an emergency control device. When the power is turned off, the tri-level rod in the horizontal position will automatically drop the rod to ensure smooth passage. When the power is turned on, the trigeminal rod must be manually reset. With up to seven different configurations, the ZM858 can be used in all construction environments, and can handle all the end-to-end lighting for pedestrian exits.

Second, characteristics:

1, alloy aluminum, stainless steel rain box, novelty and beautiful.

2, with a personalized installation interface (such as card readers, light installation, etc.), to ensure that the system integrator control gate device installation is simple and convenient.

3. The movement of the three-bar turn gate machine is automatically adjusted to the hydraulic shock absorber. When the three-slug gate is used to operate, the sound is very small, there is no impact, and the brake drying cylinder rod is automatically decelerated back to the middle. The watch surface sponge is electroplated with yellow dichromate.

4. Can be programmed with gate control, one or two directions (set by the user).

5. The base is fixed with expansion bolts. Third, technical parameters: - Power supply: single-phase AC220V, 3A, 50/60Hz. - Control voltage: DC24V, consumption: 40W. - Electromagnetic: dutycycle100%. - Shock Absorbers: Hydraulic. - Working environment temperature: -20°C~60°C. - Moderate work environment: 0 to 95% RH (no condensation). - Net weight: 62kg. - Protection level: IP45.

Fourth, the control interface:

- Two dry contact (field level) control signals are input to control the electromagnet (domain motor) and the right signal lamp in the entry and exit directions.

- Two-way dry contact (field level) status input controls illegal lights.

- One-way relay input to the remote drop control of the gate.

- Two-way high and low gate count signal output.

Fifth, the gate movement:

1. The mechanical gate movement refers to the use of a gate machine to release the three-pronged manpower push rod after the control is released; after release, the other rod passes through the movement's hydraulic damping device and stays in the horizontal position, and it needs to be solved again. Release. Putt only needs 3Kg of force.

2. The motor core is equipped with a motor in the gate. After the gate is released from control, the trigeminal rod will move forward by an angle. When the pedestrian touches the trigeminal again, the motor will take the initiative to turn the rod until another rod returns. Complete the release action after reaching the horizontal position.

Six, decorative cover:

Two individual decorative panels are provided at both ends of the shutter body. The decorative panel is made of 12mm thick PVC material. System integrators can install different user interfaces according to the needs of users, such as proximity card readers, magnetic card readers, fingerprint collectors, status indicators, and push button devices. The ruler of the decorative plate is: 265X150X12mm size.

Seven optional parts:

- There are counting devices for each population channel and each control direction that can be reset or not, electronic or mechanical control

- Display window with red prohibition and green traffic arrow.

- Displays the function window for authorized passage of rollers through the channel.

- Composite heating system for temperature control of the material can reach -20 °C.

- Integrated coin and identification receiver.

- The stainless steel base is closed.

- Tinted stainless steel shell - standard outside RAL color.

Eight, operating instructions:

The stick switch has three different modes of operation. 1. The channel is always open 2. Mechanical inlet control 3. Electric inlet control. All of the above maneuvers include an emergency design. When the sponge is powered off, the trigeminal bar opens and automatically sags to ensure smooth access. The two-way manipulation modes are specifically defined by the above code, and are related to the selected manipulation: Agreement direction A = direction on the right-hand side of the channel B = on the left-hand side of the channel

IX. Work to be completed by the customer:

- Single 6A230V power supply, grounded

- the connection to the control device

- Possible civil work and fixed work.