The cabinet is the core of the kitchen. Naturally, it will be the top priority in maintenance. A small accessory and a small handle can not be ignored. Because the materials of the cabinets are different, there are also skills in maintenance.
Cabinet cabinet maintenance
The movable shelf on the kitchen cabinet can be adjusted up and down, paying attention to the correct position of the laminate clamp (or shelf pin). It is recommended to place the heavy objects in the lower cabinet. The upper cabinet is suitable for light items, such as seasoning jars and glasses. Clean the utensils and wipe them dry before putting them in.
Cabinet door maintenance
Fire source and heat source are also one of the main factors that damage the cabinet door, so avoid high temperature baking or fire. Daily care should also be taken to avoid scratches caused by contact with sharp objects. Normally, avoid using tools such as steel balls. If there is a slight scratch, it can also be treated with furniture polish.
Cabinet hardware maintenance
Every day, the hardware must be kept clean and avoid contact with acid and alkali. If it is in contact, it should be disposed of immediately. Avoid salt, sugar, soy sauce, vinegar and other condiments directly on the hardware. If it happens accidentally, wipe it off immediately.
Cabinet countertop maintenance
Artificial stone countertops are commonly used cabinet countertop materials for cabinets. They are easy to maintain, elegant, durable and reasonably priced. They are the most common materials for kitchen countertops. Here, Xiao Bian reminds everyone that daily routine maintenance is only required according to the instructions of the artificial stone countertop maintenance manual. Artificial stone products do not need to worry for several years. It can be kept clean by simply rubbing with a sponge or multi-purpose concentrated detergent when routinely maintaining the countertop. To disinfect, use diluted bleach and water (1:1) or other disinfectant to wipe the surface. Remember to use a dry towel to absorb water stains in a timely manner and try to keep the table top dry. Remember to have sharp edges and corners to prevent scratching the surface of the table. You cannot use a steel ball to directly wipe the surface of the table, and you cannot use a knife to scrape the surface of the table.
Sink maintenance
When cleaning the sink, use a neutral detergent and wipe with a soft brush or a rag to avoid cleaning with abrasives. Do not place low-carbon steel or cast iron cookware in the sink for a long time in the daily; after cleaning the sink and faucet, wipe it with a soft and clean cotton cloth to keep the surface dry and last for a long time; do not put rubber pad, wet sponge or clean The film is left in the sink all night; if the metal chemical or soldering iron flux comes into contact with the sink, the sink must be flushed immediately.
Faucet maintenance
Clean the faucet regularly, mainly using car wax for exterior surface maintenance and cleaning. Usually use clean water to clean the surface of the faucet, then wipe it with a soft cotton cloth. Do not use any abrasive cleaners, cloth or paper towels; do not use acid-based cleaners, polishing abrasives or rough cleaners or soaps.
Hand Pads And Roll
Non-woven abrasive scouring pad roll is made from high quality nylon fibre.
Bonding abrasive on the non-woven with special resin. It's with high flexibility.
Industrial scouring pads are mainly used in the coating treatment of the surface of metal, wood and other materials, mechanical maintenance and cleaning such as cleaning, polishing, rust removal, deburring, and high-quality appearance decoration line processing operations.
The characteristics of industrial scouring pads are generally mainly elastic grinding, which can effectively prevent excessive cutting and scratching the surface of the work piece; followed by cold cutting, the common structure is effective for heat dissipation, which can prevent discoloration and deformation caused by overheating of the work piece during processing; its The third is that industrial scouring pads can prevent clogging, water and oil resistance; during the grinding process, the fibers will continue to be lost, and new grinding ore will continue to form naturally, providing better processing quality for the work piece.
We distributes and wholesales various brands of Bonded Abrasives , Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc, Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Abrasive Scouring Pad,Scouring Pad Rolls,Non Woven Hand Pad,Abrasive Scouring Pad Roll,Green Scouring Pad
Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com