Modern kitchens have more hardware and more fumes, so the maintenance of kitchen hardware is the focus. The cleaning and maintenance of the kitchen is a prerequisite for a healthy diet at home. The following describes the different kitchen hardware maintenance methods.
Kitchen hardware mainly includes rice cylinders, metal baskets, hinges, slide rails, etc. The materials are generally made of stainless steel or steel surface sprayed and sprayed. In principle, all hardware should be kept clean and dry. If it is wet, it should be dried in time to prevent water marks or rust. Because the kitchen cleaning and maintenance is the premise to ensure the health of the family, so here are the different kitchen hardware maintenance methods summarized by Xiaoxin.com.
Three kitchen hardware maintenance methods
First, kitchen hardware maintenance
For the kitchen hardware, for the dumpling chain and the slide rail, it is better to add the lubricating oil on time to ensure the smooth opening and closing of the components. Do not hang heavy objects or wet objects on the handle. If loose, adjust the screws at the back. When the door panels are not aligned or loose, the dicette can be used to research and adjust the door dumplings.
When using, kitchen hardware maintenance should pay attention to the following points:
1. Avoid salt, sugar, soy sauce, vinegar and other condiments directly on the hardware. If it happens accidentally, wipe it off immediately.
2, the door hinge should be oiled on time, keep open / free, and prevent moisture from rusting
3. When opening/closing the drawer, avoid excessive force and prevent the slide rail from coming out or being hit.
4, for high-rise blue, turn blue and other large hardware, pay attention to its direction of rotation, avoid using dead force.
Second, kitchen hardware maintenance
1. Pot, the kitchen pot is usually iron pot or stainless steel pot, wash it with detergent or water after each use, then steam the water in the pot, and finally enjoy a layer of cooking oil to prevent rust.
2, stove, after the operation, you need to leave a place on the stove, the oil is clean. Brush with a soft damp cloth dampened with detergent, and use a wire with a wire to brush the fire. After cleaning, the air drying oven can be used.
Third, the kitchen sink maintenance
1, stainless steel sink, avoid using steel balls, chemicals, steel brush to clean, scrub with a soft towel or a soft cloth.
2, other material sink, use detergent to remove oil, keep the sink clean, and clean the neck end of the tube after the filter box in time, so as to avoid the accumulation of grease in the long-term.
The kitchen hardware and kitchen hardware mentioned in the above article, as well as the sink are the most frequently used in the kitchen. The maintenance methods are also mentioned above, which are relatively simple and convenient. I hope that through the study of this article, everyone can pay attention to the maintenance of kitchen hardware. After all, kitchen cleaning and maintenance is the prerequisite for ensuring healthy eating at home. 
Editor in charge: Wang Zhen
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
The SKF bearing catalogue lists a large range of designs, variants and sizes of deep groove ball bearings. Beyond our catalogue offering, the SKF Explorer deep groove ball bearings are customizable to offer advantages for applications with specific performance needs.
SKF Deep Groove Ball Bearing,Ball Bearings for Motor,SKF Deep Groove Ball Bearing,SKF Ball Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearing.com