The integrated ceiling is an indispensable material in modern home decoration. Nowadays it has become the mainstream product for decorating the bathroom and kitchen roof, and the selection of ceilings for decoration can be tailored according to the actual area. Not only does the installation look good, but also Can not waste material. Then, Xiao Bian came to tell you about how much an integrated ceiling and a square and integrated ceiling installation method explain, take a look!
How much is the integrated ceiling?
How much is the integrated ceiling ? The cost of the integrated ceiling is mainly divided into four parts, including the cost of the aluminum buckle plate, the cost of the edge strip, the electrical and labor costs, and the labor fee is already included in the merchant's quotation. Therefore, when the ceiling is integrated, the other three are mainly calculated. Some fees. The cost is calculated as follows:
1. Aluminum buckle cost: Assuming that a space ceiling area is 10m2, divide 10m2 by the area of ​​a single piece to obtain the number of pieces, then calculate the area, and finally calculate the total square number. Sometimes there will be irregular ceiling area, will have to cut, even if it is to calculate a price of aluminum buckle. In general, the price per square meter of aluminum buckle board is about 140-160 yuan.
2. The cost of the sidebar: The sidebar is measured in meters, but also in the medium, high and low grades, so the price difference is larger, but the price is generally less expensive in 5-18 yuan.
3.Electrical Expenses: The electrical appliances mainly depends on the brands, grades and quality that individuals choose to purchase. However, according to professionals, the general 12-15 square meters of space, the total cost is calculated to be between 3000-10000 yuan.
Detailed installation method of integrated ceiling
Step one, preparation of integrated ceiling materials
Before starting to install ceilings, you must first prepare the required materials. The materials to be prepared separately are: aluminum buckle plate (market aluminum buckle plate size 300mm × 300mm, 300mm × 450mm, 600mm × 600mm), keel (light steel keel, triangle hanging piece and triangular keel made from galvanized steel plate are recommended, Trimming, etc.), electrical products.
Step two, ceiling installation
1. First, determine the area where ceilings are to be installed, then start to pull the horizontal line, then install and hang the light steel keel;
2. When installing the keel, select the special triangular card code to buckle into the triangular keel, be sure to remember to install it on the square board specification grid card;
3. After the keel is installed, this time it is possible to directly press the ceiling of the aluminum buckle plate into the triangle joint to complete the installation of the ceiling.
Step 3: Selection of Electrical Modules
The next step is to install the modules of the integrated appliance. The installation of the electrical module depends on different regions. It can also be installed according to personal preferences. This makes daily use convenient and enjoyable. The special electrical modules for the integrated ceiling are: lighting module, ventilation blow module, heating module (Yuba), air heating module and carbon fiber.
Tips 1: First of all, you must know that many well-known companies will provide integrated design and installation services, so you must buy good materials at the time of selection. At the same time, you must also tell the designer your requirements. It is possible to install ceilings by reducing some processes.
Tip 2: When choosing an electrical module, be sure to pay attention to the no-name product. This kind of no-name product is generally the kind of OEM production. In order to take advantage of its price, this may also reduce the cost. You think that the safety of the products produced in this way will certainly be worse. At the same time, the longevity and the heating effect of the products will be very problematic. Therefore, we suggest that consumers should not buy them when they choose to do so. product.
Summary: How much is integrated ceiling? One square and integrated ceiling installation method explain the relevant content to introduce this, integrated ceiling we all know that at present can not be less a kind of material, this material is also more common in the kitchen and bathroom decoration , so when it comes to installation, it must be done step by step. I hope the above introduction will help you.
Pneumatic Filter Regulator Lubricator (FRL) is used to deliver clean air, at a fixed pressure, and lubricated (if needed) to ensure proper pneumatic component operation and increase their operation lifetime. Filters, regulators, and lubricators can be bought individually or as a package.
1. Pneumatic Filter: remove water, dirt and other harmful debris from an air system. This is often the first step in improving the air quality.
2. Pneumatic Regulator: adjust and control the air pressure of a system to ensure that down-line components do not exceed their maximum operating pressures. This is the second step in the FRL system.
3. Pneumatic Lubricator: reduce the internal friction in tools or equipment by releasing a controlled mist of oil into the compressed air. This is often done last and/or right before the component needing lubrication.
Pneumatic FRL, Pneumatic FRL Unit, Air Source Treatmnet, Air Preparation Unit, Air Service Unit
NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com