What should I pay attention to in the renovation of the rough wall? What are the steps?

Now our new house is mainly based on rough house, so we still need to decorate the rough house before we can stay. For the owner of the first renovation, the wall decoration step of the rough house is also a problem, then how to decorate the rough house Here, the following small series will introduce you to the relevant matters of the wall decoration steps of the rough house .


Blank house wall decoration steps


Blank room wall decoration steps:


1. Defining the main wall size: When we are decorating the rough room, we first need to understand the area that needs to be renovated, especially the tile area, wall paint area, wallpaper area and floor area. It is best to measure it once and for yourself. .


2, the main body transformation: the theme of the transformation refers to the wall, wall, shovel wall, demolition of heating, plastic window and so on. The dismantled garbage should be cleaned up in time to ensure the cleanness of the room and facilitate subsequent construction.


3, hydropower transformation: hydropower transformation, try not to regret it. Because the tiles and ceilings are installed, it is more difficult to add sockets. Therefore, be sure to determine the exact location of switches, lamps, basins, bathtubs, washing machines, etc. Before the hydropower transformation, the cabinet designer should go to the door for the first measurement to help you determine the power and waterway transformation plan. Water heaters, it is also best to send people to design the location of the power supply and interface according to the model you have determined.


4, the floor tile laying: before the tiling, you must buy a floor drain. After waterproofing and pulling, you are ready to tiling. Tiles should pay attention to soaking water, dry and dry, and the broken tiles can be left for cutting, so that the indoor floor is laid more beautifully.


5, beautify the rough house wall: commonly used landscaping wall method has painted and affixed wallpaper, paste wallpaper than paint wall paint, the effect is much better. After the wall paint is brushed, the oil union will brush the lacquer in the place where the wallpaper is needed, and the paint can be dried every other day. Then you can post the wallpaper to the master. Note: Do not open the window for ventilation within 48 hours after the wallpaper is posted, let it dry slowly.


6, kitchen and bathroom ceiling installation: kitchen and bathroom ceiling installation is very important, usually in the rough room needs to be installed first, in the kitchen and bathroom ceiling installation need to install the moisture-proof ceiling lamp, exhaust fan, Yuba at the same time, and need to reserve the head And opening.


Blank house wall decoration steps


7. Cabinet installation: After the installation of the kitchen and bathroom ceiling is completed, the cabinet can be installed, which can be completed in about one day. When the cabinet is installed, the sink, gas stove and range hood need to be installed together.


8, switch socket installation: as a user of the house, you must be clear about the number and location of the switch socket, and make a clear Geely, if the home posted a wallpaper, then it is best to do the socket logo in the corresponding location .


The above is a detailed answer to the small wall decoration steps of the rough house. I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the exciting aspects of the rough wall decoration steps, Please continue to pay attention to our decoration encyclopedia section!


More related wonderful reading:

Rough house wall decoration steps, wall decoration preparation

Blank house wall decoration steps rough room wall decoration considerations

What is the wall decoration step? What is the wall decoration step of the rough house?


Mechanical Fuel Level Gauge

The mechanical fuel level gauge integrates liquid level detection and display (without any external device), which can display liquid level directly and is easy to install. It is widely used in gasoline tank, diesel tank, hydraulic station and water tank of all kinds of generators and engines.

Mechanical Fuel Level Gauge,Fuel Level Indicator,Fuel Tank Level Gauge,Diesel Tank Level Gauge

Xi'an Gavin Electronic Technology Co., Ltd , https://www.gamicos-meas.com

Posted on