I believe everyone knows that belt wear is a common failure problem in mechanical production! So what caused it? What should I do when such a fault occurs? Today, based on years of production and sales experience, Yonghang transmission belt manufacturers will analyze it in detail for everyone, and hope to help everyone!
The following are the four common causes and treatment methods of S3M PU timing belt wear:
One: The actual transmission load of the mechanical equipment exceeds the design load. When this happens, first check whether the mechanical equipment is operating normally, and then confirm whether the settings need to be changed;
Two: The tension of the timing belt is too large. In this case, it is only necessary to adjust the belt tension reasonably;
Three: The belt drive is in an environment with too much abrasive dust. At this time, it is necessary to improve the environment of the transmission or provide a protective cover for the transmission;
Four: The tooth shape of the synchronous wheel is inaccurate. At this time, qualified, standard pulleys need to be replaced
>>> Yonghang Transmission Belt Company has been focusing on the R & D and production of S3M PU timing belts for 10 years, using the manufacturer's *** model, eliminating the middleman to earn the difference, saving indirect costs by more than 60%, providing one-stop customized services, and providing 6 Monthly free warranty service and technical support! Welcome to log in to http://www.yonghang.com for more information, Yonghang will serve you wholeheartedly! Article copyright: Yonghang Transmission Belt Company, please indicate the source when reprinting, thank you for your cooperation!
================================================== ================================================== ======
LED Light Pad, tracing light pad, light box for tracing, tracing light board
A4 Led Light Pad,Animation Cartooning Pad,Light Box Tracing Pad,Wireless Charging Pad For Tracing
Guangdong Jishengke Industrial Co., Ltd. , https://www.suronart.com