| Main Pipe: | Â H65 brass ; tube:40*10mm |
| Plating: |  Chrome plated, 8um nickel, 0.2um chrome. |
| Head shower: | Â Brass/stainless steel/ABS plastic:8/10 Â inch diameter |
| Hand shower: | Â ABS Plastic /Brass |
| hose: | Â brass /ABS/S.S |
| Hand shower holder: | Brass slider |
| Diverter: |  Brass |
| shower Mixer: |  Brass with Hot and cold water |
| Accessories: | Â wall holder,screw |
| Testing: | Â 24 hour acid mist teset,120 Neural Salt Spraying Test |
| Water pressure testing: | Â 1.6MPA |
| Air pressure testing: | Â Â 0.8MPA |
| Guarrantee: | Â 5 years |
| Certificate: | Â WaterMark |
| MOQ: | Â 10sets |
| Main market: | Â Europ,USA,Austrial,Middle East Countries; |
| packing: | Â Inner packing: cloth bag, brown inner box or color box Outer packing: brown master/ Kraft carton (The package also can be done as customer requirements.) |
Â
The simplest shape of the reinforcing ring is a rectangular column attached to the surface of the product, but in order to meet some production or structural considerations, the shape and size of the reinforcing ribs need to be changed as shown in the following figure. The position of the bottom of the product must be rounded to eliminate excessive stress concentration. The rounded corner design also gives the runner a gradual shape to fill the cavity with curvature. Problems such as water trapping will also lengthen the production cycle and increase production costs.
Shield Reinforcement Ring,Tunnel Reinforcement Ring,Shield Tunnel Ring,Concrete Surface Of Ring
Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com