PARAMETER
Max Cylinder Bore 280mm
Min Cylinder Bore 10mm
Max Piston Rod Dia. 280mm
Min Piston Rod Dia. 10mm
Max Retract Length 3500mm
Min Retract Length 50mm
Max Stretch Length Single stage cylinder 6500mm
Dual stage cylinder 12500mm
Min Stretch Length 60mm
Max Working Pressure 4500PSI
Min Working Pressure 1000PSI
Working Pressure of Heavy-duty Cylinder 7500PSI
Intended Use: Lifting machinery.
| NO. | L*W*H*X (mm*mm*mm*mm) |
MASS(Kg) | Recommended truck G.V.W(Kg) | Body length L (mm) |
Rear overthang R (mm) |
Distance between trunnion to hinge | Rated lifting capacity (Kg) |
| KRM92 | 1090*547*414*514 | 130 | 4000-5500 | 3100 | 340 | 1270 | 2000-3000 |
| KRM143A | 1184*407*329*403 | 168 | 6000-9000 | 3400 | 400 | 1100 | 4000-5000 |
| KRM160C | 1722*500*528*526 | 282 | 11000-17000 | 4500 | 750 | 2050 | 6000-8000 |
| KRM160S | 1434*500*343*577 | 252 | 8000-11000 | 3800 | 600 | 1400 | 6000-8000 |
| KRM201 | 1886*586*419*588 | 475 | 25000-32000 | 6000 | 1000 | 2630 | 16000-18000 |
| KRM220(48°) | 2124*615*559*600 | 670 | 28000-35000 | 6000 | 1000 | 3380 | 18000-25000 |
| KRM220(68°) | 2940*615*512*600 | 930 | 30000-39000 | 8000 | 1200 | 3630 | 20000-29000 |
Selling Points:
1. High precision, the outer and inner round of telescopic is processed by specific machine
2. Durable and corrosion, the Chrome thickness on the outer surface is up to 0.05mm
3. Stable quality, with imported seal material
4. The upper and lower support shaft is processed by overall forging to make its strength better.
5. In structure, our front lifting telescopic cylinder is mature and stable as European famous brands
6. In domestic market, most of the front lifting telescopic cylinder with 5390 stroke only have the maximum diameter of 180mm and minimum 100mm , but ours are 185mm and 110mm .So in theory , the lifting strength of our products is upgraded by 7% , and anti-flexural capacity increase 15%.
product model:
Application range:
Service and Quality Assurance: OEM service is offered too.
Our design Dept. and strict QC Dept. can control the quality in steady.
1. Clevis End Mounting
2. 2320 PSI Working Pressure, 3"Bore, 70" -72.5"Stroke, 1"Rod Diameter
3. Black, double Acting Application
Â
Our companies can customize the design, the production of all types of excavator's hydraulic cylinder. We have sets of advanced cylinder production equipment. The cylinder liners are made of cold drawn seamless steel tubes with strong honing technique. The cylinder length can reach up to 7m with diameters from φ40 to φ500. The piston rods are made of chrome steel with special heat treatment. The diiron sing technique is applied to the surface, with makes it high in smooth finish with tough inside and hard outside. The piston rod's diameters are from φ5 to φ180, equipped with high quality seals. The quality of our cylinders is guaranteed by the test of high-pressure test bed. We can serve you with our quality products, reasonable price, and timely delivery.
PARAMETER
Max Cylinder Bore 280mm
Min Cylinder Bore 10mm
Max Piston Rod Dia. 280mm
Min Piston Rod Dia. 10mm
Max Retract Length 3500mm
Min Retract Length 50mm
Max Stretch Length Single stage cylinder 6500mm
Dual stage cylinder 12500mm
Min Stretch Length 60mm
Max Working Pressure 4500PSI
Min Working Pressure 1000PSI
Working Pressure of Heavy-duty Cylinder 7500PSI
Intended Use: Lifting machinery.
| NO. | L*W*H*X (mm*mm*mm*mm) |
MASS(Kg) | Recommended truck G.V.W(Kg) | Body length L (mm) |
Rear overthang R (mm) |
Distance between trunnion to hinge | Rated lifting capacity (Kg) |
| KRM92 | 1090*547*414*514 | 130 | 4000-5500 | 3100 | 340 | 1270 | 2000-3000 |
| KRM143A | 1184*407*329*403 | 168 | 6000-9000 | 3400 | 400 | 1100 | 4000-5000 |
| KRM160C | 1722*500*528*526 | 282 | 11000-17000 | 4500 | 750 | 2050 | 6000-8000 |
| KRM160S | 1434*500*343*577 | 252 | 8000-11000 | 3800 | 600 | 1400 | 6000-8000 |
| KRM201 | 1886*586*419*588 | 475 | 25000-32000 | 6000 | 1000 | 2630 | 16000-18000 |
| KRM220(48°) | 2124*615*559*600 | 670 | 28000-35000 | 6000 | 1000 | 3380 | 18000-25000 |
| KRM220(68°) | 2940*615*512*600 | 930 | 30000-39000 | 8000 | 1200 | 3630 | 20000-29000 |
Selling Points:
1. High precision, the outer and inner round of telescopic is processed by specific machine
2. Durable and corrosion, the Chrome thickness on the outer surface is up to 0.05mm
3. Stable quality, with imported seal material
4. The upper and lower support shaft is processed by overall forging to make its strength better.
5. In structure, our front lifting telescopic cylinder is mature and stable as European famous brands
6. In domestic market, most of the front lifting telescopic cylinder with 5390 stroke only have the maximum diameter of 180mm and minimum 100mm , but ours are 185mm and 110mm .So in theory , the lifting strength of our products is upgraded by 7% , and anti-flexural capacity increase 15%.
product model:
Application range:
Service and Quality Assurance: OEM service is offered too.
Our design Dept. and strict QC Dept. can control the quality in steady.
1. Clevis End Mounting
2. 2320 PSI Working Pressure, 3"Bore, 70" -72.5"Stroke, 1"Rod Diameter
3. Black, double Acting Application
Â
Our companies can customize the design, the production of all types of excavator's hydraulic cylinder. We have sets of advanced cylinder production equipment. The cylinder liners are made of cold drawn seamless steel tubes with strong honing technique. The cylinder length can reach up to 7m with diameters from φ40 to φ500. The piston rods are made of chrome steel with special heat treatment. The diiron sing technique is applied to the surface, with makes it high in smooth finish with tough inside and hard outside. The piston rod's diameters are from φ5 to φ180, equipped with high quality seals. The quality of our cylinders is guaranteed by the test of high-pressure test bed. We can serve you with our quality products, reasonable price, and timely delivery.
Stainless Steel Washer,Stainless Steel Fender Washer,Din9021 Fender Washer,Stainless Steel Flat Washer,stainless steel retaining rings
Taizhou Fengye Metal Products Co., Ltd. , https://www.fyhandware.com