Winter wheat high yield fertilization technology

1. Reapply the base fertilizer. Generally, 2000kg of high-quality organic fertilizer is applied per 667m2. According to the fertilization law of wheat, 4~7 kg of urea or 23~38 kg of ammonium bicarbonate, 15~17 kg of diammonium phosphate and 12~17 kg of potassium chloride should be applied per 667 m2 of high-fertilizer water block, and 45% compound fertilizer can also be used. 50 kg or 40% wheat special fertilizer 50 kg. For medium and low yielding fertilizer plots, 2~5 kg of urea or 5~12 kg of ammonium bicarbonate, 18~22 kg of diammonium phosphate and 9~12 kg of potassium chloride should be applied per 667 m2; 45% compound fertilizer or 40% can also be used. Wheat special fertilizer 40~50 kg or 36% potassium dihydrogen phosphate compound fertilizer 50 kg. Zinc-deficient plots can be applied with 2 kg of zinc sulphate.
2. Less fertilization. Fertilization is the most cost-effective method of fertilization. Generally, 2~3 kg of urea is applied per 667 m2, or 8~10 kg of superphosphate, and about 10 kg of compound fertilizer can also be used. Micro-fertilizer can be used as base fertilizer or seed dressing. When used as a base fertilizer, it is difficult to spread evenly due to the small amount of use, and it can be mixed with fine soil and then applied to the surface, and then ploughed into the soil. When seeding with zinc or manganese fertilizer, 2 to 6 g of zinc sulfate and 0.5 to 1 g of manganese sulfate per kg of seed are planted immediately after seed dressing.
3. Skillfully apply top dressing. There are two types of topdressing: (1) soil topdressing. The time of top dressing is generally in the jointing stage. The amount of topdressing depends on the seedlings. The wheat is divided into many parts. The seedlings are good and the growth is strong. It should be applied late and reduce the application rate. It can be 15~20 kg per 667 m2 of urea after jointing. Ammonium hydrogen is 40~50 kg. Wheat is less tiller, the seedlings are not good, and the growth is weak. It should be applied early and increased. It can be applied with 20~25kg of urea or 50~70kg of ammonium hydroxide per 667 m2 after regreening. However, for soils with poor soil fertility, the amount of nitrogen fertilizer should not be too large. It is appropriate to apply 15~17kg of urea per 667 m2, and the application should not be too late. However, when the base fertilizer is not applied with phosphate fertilizer and potash fertilizer, and the soil supply of phosphorus and potassium is insufficient, the phosphate fertilizer and potash fertilizer should be properly applied. For high-yield fields with insufficient potassium, it is also possible to apply about 150 kg of grass ash before winter. For wheat fields with sufficient fertilizer, avoid excessive application of nitrogen fertilizer, and the time of top dressing should not be late. Otherwise, it will easily lead to late maturity and reduce production. (2) Spraying outside the roots. Due to inconvenient topdressing in the wheat field, the absorption capacity of the root system is decreasing with the advancement of the growth period. Therefore, if the fertilizer must be applied after the late growth of the wheat, foliar spraying can be used, which is also an emergency measure for increasing wheat production. Every year in late May is a dry and hot wind-prone season. Using 0.2% potassium dihydrogen phosphate foliar fertilizer for 1~2 times, with an interval of 5~7 days, it can effectively prevent dry heat and wind damage.

Huaxian Liu Huimin
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

Vegetable&Fruit Lighting

Fruit and vegetable display lighting, agricultural product display lighting, fruit and vegetable showcase lighting, leafy green vegetable display lighting and organic food display lighting are all lighting solutions used to highlight the quality and appeal of produce.

The produce display lighting system highlights the color, texture and appearance of the produce through the use of special spectrum and lighting layouts. They use high-efficiency LED lights as a light source, and precisely control the color temperature and brightness, creating a bright and natural feeling, increasing the product's ornamental and purchase desire.

When displaying produce, these lighting systems focus on uniform light distribution, ensuring that each product is properly illuminated and avoiding dark or over-exposed areas. Whether vegetables, fruits or green leafy vegetables display lighting, they can show a fresh, healthy appearance, enhance the customer's buying experience. For organic food display lighting, it puts more emphasis on the natural and healthy properties of the product. Through well-designed lighting schemes, the original characteristics of organic food can be better displayed, attract more attention, and convey the concept of healthy eating. These display lighting systems can not only enhance the attractiveness of sales venues and increase product sales, but also emphasize the freshness, quality and nutritional value of agricultural products. Whether in supermarkets, malls, farmers markets or organic food stores, these lighting solutions can create a pleasant shopping environment for consumers and enhance customer satisfaction and purchasing experience.

In short, the lighting solutions such as vegetable and fruit display lighting, agricultural product display lighting, fruit and vegetable showcase lighting, leafy green vegetable display lighting and organic food display lighting are designed to highlight the appearance characteristics of agricultural products through special spectrum and layout design, enhance the attractiveness and sales effect of products, and create a pleasant and healthy shopping environment for consumers.

Fruit&Vegetable Display Lighting,Agricultural Product Display Lighting,Fruit&Vegetable Showcase Lighting,Leafy Green Vegetable Display Lighting, Organic Food Display Lighting

SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com

Posted on