When the living room is renovated, many of the things that are done manually do not have the machine to come fast, and there is no machine to do well. . Therefore, more and more construction is carried out by people using machines. For the wall construction, the putty grinding machine can also be called "wall grinding machine", "wall sanding machine", "wall polishing". Machines, "grinding machines", "polishing machines" vary from place to place. So, what is its source? What is it? Today, Xiaobian will take a look at the detailed introduction of the wall putty grinding machine !
Source of wall putty grinding machine
Nowadays, because there are fewer and fewer young people entering the decoration industry, everyone likes to enter the factory and have a decent job. The decoration is white or other on the wall, and it is inseparable from the painter. The work of the paint is because the dust is big and dirty, and fewer and fewer people are engaged in this industry. The current economic development is the rapid development of real estate, while the decoration industry is also developing rapidly, and it is necessary to engage in masters. The imbalance between supply and demand has caused the price of workers' masters to rise fast, and they still can't find a master.
And because of the large amount of mechanized construction, the woodwork has greatly improved productivity. Paint coating is urgently needed to mechanize the coating tool to solve the problem.
Now there are some related manufacturers in the market, which can be divided into dusty and dustless. Dust-grinding, while polishing, although the efficiency is increased, the price of the machine is also slightly, and there is no way to solve the dust; and the dust-free grinding not only solves the problem of slow grinding, but also solves the generation of dust. And because of the principle of relying on mountains, the wall surface is smooth and delicate, which is unmatched by hand.
How to use putty grinding machine
1, the whole body relaxes, facing the sand wall
2, the hand naturally open, hold the sander
3, boot (this is the key point): must first move the sander, then turn on the switch power; shut down the power should first turn off, then stop the sand. Otherwise, a round pit will appear on the wall.
4. Polish the wall:
1 The operator needs to maintain the balance between the dust cover plane and the sanded wall surface. The vacuum sandpaper machine always maintains balance during the sand wall process, so as to ensure that the dust is not thrown out.
2When sand wall, sand marks appear on the wall surface, mainly by changing the number of sandpaper and adjusting the speed of the sander to adjust (some of the putty powder is not good in quality, the grain thickness is not uniform, and there is also the phenomenon of wall sand marks. That will change the putty
Powder brand).
3 If the sand is found to have insufficient pressure on the wall, the vacuum type sandpaper machine can remove the rotating sanding disc in the dust cover, and add a gasket between the rotating sanding plate and the fixed shaft to increase the rotating sanding disc. The height is adjusted.
5, sand top:
1 The top distance between the top of the head and the top of the ceiling is about 5 cm.
2 Because the dust pipe provided by the factory has built-in spring steel wire, the new pipe of the vacuum-type sandpaper machine has a relatively large pulling force on the sand top plane when used. It can be stretched for a period of time before use, so that the pulling force is small and labor-saving.
6, clean the dust bag
1 When the dust in the dust bag is collected in 60% bag, it must be cleaned, otherwise it will affect the dust removal effect.
2 Pull open the extruded card at the bottom of the dust bag, and after re-cleaning the dust, you can restore it again.
3 When grinding the putty wall, the dust extraction rate is high. It is necessary to clean the dust once it is polished 20-30 square meters.
In the process of wall construction, if the quality of the wall surface engineering is better, the construction process of the putty grinding machine is indispensable. If you are decorating the wall yourself, you can purchase a small use of the putty grinding machine. The above is the source of the wall putty grinding machine introduced by Xiaobian today and its use is over here. For more information, please continue to pay attention to the decoration home network.
More related wonderful reading:
How to adjust the wall putty? Wall putty purchase tips
Wall putty construction process wall putty construction process considerations
Sensor Light Bulb,Sensor Led Night Light,Motion Sensor Led Light,Human Motion Sensor Led Light
JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.zjsensorsled.com