(1) no water or no water, mostly due to the end of the valve stuck, partial fouling of water; absorbent height is too high or suction pipe leaks; and impeller tract infarction, etc. should be identified to take the appropriate method of treatment. Tips: Installation and troubleshooting of agricultural pumps (2) pipeline leaks or leaks, the bolts can not be tightened device. If the leakage is not serious, in the center of leaking or leaking paint grout, and tighten the nut with a wrench; if serious water leakage, we must reload. (3) water pump violent vibration, can be uneven in the electric rotor, shaft coupling may be bad, bearing wear and bending; can also be caused by rotating parts slack, rupture and pipe support is not strong and so on. Should be adjusted depending on the situation to stop, strengthen, straighten or change.
DH series homogeneous & emulsification pump is composed of a first-class working chamber. The working chamber is equipped with a group of 3-6-layer stators and 3-6-layer rotors. The tooth discs of each stator and rotor are from coarse to fine, so that the original granular materials of different thickness can smoothly enter the working chamber for layer by layer crushing, dispersion, fine, homogenization and emulsification.There are 5 kinds of products in this series. Developed independently by our company, the application technology is very mature. We have a strong technical team and our users all over the world.
Homogeneous and Emulsification Pumps
NINGBO DURREX PUMPS CO.,LTD , https://www.durrexlobepump.com