According to the feeding object, different feed pellet machines, such as fish, chicken, rabbit, sheep, etc., in which the fish and chicken are used, the concentrate is more, and in the case of the same particle diameter, a relatively thick "mode" is generally selected. "Plate", rabbit and sheep pellets should use "thinner" "mold plate". This is because when there is more "fine" feed, the pressing resistance is smaller and the power consumption is less. Generally, when the rabbit and sheep are used for pellet feeding, the proportion of grass powder accounts for 50% or 60% of the total material. When the grass powder is pressed and extruded in the "die" hole, the resistance is large and the power consumed is also large.
Choose according to the relevant standards of the Ministry of Agriculture. The hourly electricity output should be no less than 40 kg (particle diameter 4-6 mm, flat mode). When selecting the user, it depends on the label on the manufacturer's nameplate. The prepared pellets should be smooth and moderate in hardness, the breaking rate should be less than 4%, and the moisture content of the feed should be less than 10%.
During the pressing process, the pellet temperature of the pellet feed should be about 60 °C, and it can be matured deep, and should not exceed 80 °C at most. Otherwise, various trace elements added during the granulation process will suffer losses. It is best to choose a "dry, dry" pellet feed machine, because the pellet feed produced by the machine does not need to be baked, exposed to the sun, and can be bagged for storage and storage when aired to room temperature.
Choose according to the relevant standards of the Ministry of Agriculture. The hourly electricity output should be no less than 40 kg (particle diameter 4-6 mm, flat mode). When selecting the user, it depends on the label on the manufacturer's nameplate. The prepared pellets should be smooth and moderate in hardness, the breaking rate should be less than 4%, and the moisture content of the feed should be less than 10%.
During the pressing process, the pellet temperature of the pellet feed should be about 60 °C, and it can be matured deep, and should not exceed 80 °C at most. Otherwise, various trace elements added during the granulation process will suffer losses. It is best to choose a "dry, dry" pellet feed machine, because the pellet feed produced by the machine does not need to be baked, exposed to the sun, and can be bagged for storage and storage when aired to room temperature.
Jiangyin Suofei Electronic Technology Co.,Ltd. , https://www.suofeiscales.com