Decoration waste more than 300 billion yuan "black hole" produced four factors

>>>Second-hand house decoration design must not be wasted

The China Interior Decoration Association has disclosed that the waste of Chinese families in decorating and decorating is extremely alarming. The annual cost of wasted decoration has reached more than 30 billion yuan.

Wasted black holes are often reflected in what areas. How can we block this black hole?

Wasting 1. Happy

Many people in the second-hand housing renovation, often require the original kitchen ware, room electrical switches, sockets, lamps, doors and windows, etc. to be replaced. If the wall can be dismantled and dismantled, it must be possible to dig a hole to make a closet. Some bathrooms, if they have already been equipped with a washbasin or toilet, must be knocked out and replaced with their own carefully selected ones. Some of these are due to the quality or style of sinks, toilets, and electrical switches that developers have assembled. Some of them are not bad, but replacing old devices has become an inertial way of thinking when people are fitting. In addition, some people, after purchasing a refined decoration room, do a little bit of dissatisfaction with the original fine decoration and do a second renovation. This will inevitably lead to waste.

Plugging Countermeasures: The second-hand housing renovation is a systematic project, so it is necessary to develop a detailed renovation plan before the renovation. During the renovation process, the second-hand house is different from the new house, and the decoration must first be dismantled, but care must be taken not to knock out all the old ones, and some of the dismantled materials can be reused, such as floors, tiles, etc.; The key to renovation is to avoid damaging the bearing wall.

Waste 2. Bigfoot

During the renovation, workers will be seen removing bags of garbage almost every day. How many of these are real rubbish, and how much is waste caused by the waste of materials, nobody can make it clear.

The construction workers waste the decoration materials at will, for example if the overall planning is not done when cutting the boards, causing the large plates to be thrown away. When corners of wall and floor tiles are attached, the scrap can be used but not used, and the entire tile is cut out for convenience. Not picking the floor before picking, not only the color difference is obvious, there will be a knotted floor in a conspicuous place, resulting in a repurchase. At the time of the work, the paint and the paint were not used up but the seal was not closed, causing the dried knot to be thrown away. The brush is not cleaned in time, causing scrap and so on.

Plugging measures: Determine the amount of building materials required for decoration, and purchase them by quantity. If you need to make furniture, when you buy wood, let the woodworker calculate the amount according to the map, let him first establish the awareness of saving, if the material is not enough due to waste in the construction process, then you can also distinguish the responsibility. When buying a tile, ask bricklayers to learn about the specific dimensions of the wall and floor. When buying, try to select the appropriate size to avoid oversize or undersize and require a lot of cutting.

In the signing of the contract, the terms are added, and as far as possible, the details that have been considered in advance are listed one by one. First, the responsibilities are classified to safeguard their own rights and interests.

Waste 3. Design surplus

Xuemou has 120 square meters of the house, the contract agreed that 60,000 yuan can be decorated. However, in the construction process, the project manager suggested that the TV cabinet should be made bigger, and the background behind the bed should be done. If the spotlights are installed in the living room or restaurant, the room will be bright and gorgeous. As a result, designers are required to revise their plans. In addition to the living room and dining room, a large number of spotlights are installed in the wine cabinet of the entrance, totaling more than 40. The cost is much more than the amount agreed upon in the contract. In fact, these lights cannot be turned on several times a year. It is a waste.

Plugging measures: Make sure the design draft is determined in advance, and make as few changes as possible during the construction process to avoid re-purchase of materials.

Wasteful 4. Flashy

Blindly pursuing large units and opening windows is in conflict with the green buildings that the country is currently implementing. For window walls, the ratio is an important parameter in building energy efficiency. The size of the windows is related to the effects of lighting, ventilation, and viewing. Therefore, many people mistakenly believe that the larger the window opening, the more they can provide visual satisfaction.

Plugging Countermeasures: In fact, experts have shown that the window that accounts for 30% of the walls has been able to achieve the highest level of psychological satisfaction. The larger the window opening can only lead to more energy being evacuated from the window in the room and does not meet the building energy saving requirements. Therefore, the construction itself should refuse to be frivolous, and design should be considered from the perspective of energy conservation and environmental protection.


Save money Decoration window decoration Interior decoration room Toilet decoration living room living room wine cabinet wine cabinet floor brick wall cabinet closet door kitchen cabinet door bathroom tile bathroom door bathroom door size bathroom size overall bathroom toilet design bathroom floor tile restaurant furniture floor tile kitchen tile ceramic tile specifications

HDPE black corrugated spiral Plastic Pipe for prestressing

 

1. Type: Plastic(HDPE) Ducts  

2. Shape: Flat and Round

3. Diameter: from 46 mm to 140mm.

4. Application:  prestressed concrete structure, such as the large span railway and highway, bridge,  crane girders, rock-soil anchoring engineering, multi-floor industrial plant, coal, sports venues, etc 

5. Professional services: 1x7 days 24 hours service online, We can make different thickness and length for the customer 

6. Samples: We are free to provide you sample for your check


Company information

Brief Introduction of Boya:

Established in 2002, Zhejiang Boya Com-tech Co., Ltd. The company is located in Zhejiang Quzhou, and covers an area of 16000 square meters and has around 50 staff members,is a company specialized in manufacturing the new traffic communication pipe and drainage material and . we enjoy convenient access to major transportation networks. Furthermore, all our products are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. The company has passed ISO9001-2008 quality management system certification, ISO 14001:2004 Environment Management System Certification, all products has passed the national provincial detection test.

The main products of BoYa include PVC/PE cable protection pipe, PVC/HDPE perforated plastic pipe ,PVC/HDPE perforated plastic Corrugated Pipe, Plastic / metal corrugated ducts for prestressed concrete , The geotextile material,Geosynthetics for waterproofing and drainage.

we are enjoying good reputation among clients at home or abroad by timely supply, credible quality and sincere service.

If you are interested in any of our products, or wish to place a customized order, please contact us. We will do our best to meet your needs.    

Pre-stressed Plastic Corrugated Pipe

Large Diameter Pvc Pipe Corrugated Pipe,Prestressed Concrete Steel Strand Pipe,Circular Plastic Corrugated Pipe/Tube

ZHEJIANG BOYA COMTECH CO.,LTD , http://www.zjbytx.com

Posted on