The unreasonable structure of the original structure or the change of structure according to one's own ideas is a situation that many decorators may encounter when designing a house. The removal of part of the wall is the most common method. The houses are diverse in structure and complex in structure. Once inadvertent, there will be a lot of trouble.
Complex structure, need to distinguish professional
The wrong approach: The old house was overhauled and the structure was not known. The work was started only on the basis of experience, resulting in the demolition part being exactly the bearing wall. After being known by the property, not only the fine but also the part of the wall that was knocked out was added.
The correct approach: The structure of the old house is complex and it is difficult to distinguish the nature of the wall. Finding ordinary decoration workers is prone to misidentification. It is best to find professionals or veterans to determine.
Drawings are important and need to be confirmed repeatedly
The wrong approach: drawings have errors, construction workers did not pay attention, knocked down the cement wrapped outside the reinforced concrete columns. They did not know that this was a load-bearing structure until they encountered a rebar.
Correct practice: Drawings are the basis for construction. A point or a horizontal line will affect the construction. Therefore, before the drawing is issued, it must be repeated.
Infrastructure, don't change at will
The wrong approach: In order to make the house look a bit higher, the owner hopes to cut as much as possible the lower edge of the lintel. The rebar can be exposed outside the wall.
The correct approach: When designing a house, you cannot consider only the needs of each person and the beauty of the house, and ignore the original structure. Only under the conditions allowed by the original structure can it be properly reconstructed.
Wall construction house renovation design room house design cement bathroom design bathroom door size bathroom size bathroom door
Today, the Iron Padlock application is very common, small to every family, large companies, factories, warehouses.
Can be divided into galvanized iron padlock, grey iron padlock, iron padlock imitation brass,gold plated iron padlock,Color by customers choice.
We are a professional manufacturer is a padlock, padlock industry has engaged in 26 years of history, to provide satisfactory service to every customer, and create a win-win.
Iron Padlock,Thick Iron Padlock,Security Iron Padlock,Square Iron Padlock
Shengping Safety Protection Locks Manufacturer , http://www.chinajiuzhou.com