Pump rotor to measure the reason for the swing

Akira that is beating. Measuring the radial runout of the rotor, the purpose is to detect errors in the assembly of the rotor (such as bending the shaft during assembly) in time or to discover any failure of the rotor assembly (eg, the impeller is not concentric with the shaft, etc.) Measured separately on the false axis). The method of measuring the wobble is the same as the method of measuring the wobble of a shaft. General impeller seal ring (collar) radial runout does not exceed 0.08 mm, the sleeve does not exceed 0.04 mm, both ends of the shaft diameter of not more than 0.02 mm. In this process, you must measure the impeller at all levels of the distance, the size of the distance should be strictly in line with the requirements of the drawings, such as the error is too large, you must adjust.

Elevator Rope Gripper

OTIS Elevator Rope Gripper, Thyssen Elevator Rope Gripper, KONE Elevator Rope Gripper, GiantKONE Elevator Rope Gripper, ThyssenKrupp Elevator Rope Gripper, Schindler Elevator Rope Gripper, XJ Schindler Elevator Rope Gripper, Xizi OTIS Elevator Rope Gripper, Mitsubishi Elevator Rope Gripper, Shanghai Mitsubishi Elevator Rope Gripper, Fujitec Elevator Rope Gripper, Hitachi Elevator Rope Gripper, Toshiba Elevator Rope Gripper, Hyundai Elevator Rope Gripper, LG Elevator Rope Gripper, Sigma Elevator Rope Gripper, Express Elevator Rope Gripper, GUANGRI Elevator Rope Gripper, FUJI Elevator Rope Gripper, BLT Elevator Rope Gripper, CANNY Elevator Rope Gripper, SJEC Elevator Rope Gripper, KOYO Elevator Rope Gripper, IFE Elevator Rope Gripper

Elevator Rope Gripper,Linear Guide Elevator Rope Gripper,Parallel Style Elevator Rope Gripper

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjfullelevatorreplacement.com