Axial flow pump in today's national economy plays a very important role, it can transport clean water, mild sewage, high temperature, good cooling conditions, the pump run well balanced, stable, small vibration, Low noise and other advantages. As its use continues to increase, the working principle of axial flow pump has become the urgent need for many users to understand the information. Axial flow pump works Axial flow pump works: The wing hanging in the fluid, the fluid flows at a certain speed, the negative pressure occurs on the airfoil, the back pressure occurs, the positive and negative pressure of the size and wing and Angle of attack, wing dorsal and flow direction of the inclination and the size of the fluid speed. If the fluid does not move and the wings move in the fluid at equal speeds, then the back and the airfoil are subjected to the same positive and negative pressure as before, ie, the airfoil, and the positive wing above the wing with positive pressure. The wing will gain lift under this pressure. If the wing-shaped blades fixed on the shaft, the formation of a propeller, and can not move in the axial direction, when the shaft rotates at high speed, the airfoil, propeller under suction due to negative pressure, wing back Positive pressure and drainage effect, so a row of suction caused by the liquid (or gas) flow. This is the working principle of axial flow pump. Through the above introduction, we have been able to initially understand the working principle of axial flow pump, axial flow pump of this work advantage, making it in the electrical, instrumentation, gas, waterways, oil and other industries have a very positive role. To further optimize the working principle of axial flow pump, axial flow pump to improve the competitiveness of certain will have a very positive role.
Explosion Proof Peristaltic Pump
Electric Explosion Proof Peristaltic Pump.Can be installed large flow pump head with maximum flowrate of 12000ml/min (single channel).
A sharp explosion peristaltic pump can be mounted high flow pump head. Speed can be adjusted manually adjust the speed planetary CVT. Used in various environments, in particular, the requirement to use explosion-proof environments.
Explosion-proof pumps are also used to move gasoline, diesel fuel, oil, ground water, potable water, salt water, wastewater, sewage, sludge, slurry and ash slurry, gas and air, powders, and rendering wastes, a variety of liquids, liquids with solids, etc.
Explosion Proof Peristaltic Pump,Peristaltic Pump Explosion-Proof,Explosion-Proof Peristaltic Pump,Explosion Proof Peristaltic Pumps
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com