Combination of new square shoulder milling cutters
When developing a new square shoulder milling cutter, the key point is to combine the ability to create a high quality end surface with the shoulder surface. Some milling tools are capable of cutting high-level end faces or square shoulders, but no tool can simultaneously achieve both high precision and surface quality.
Since the industry is most concerned with production efficiency, it is necessary to combine the ability to perform fine end face and square shoulder milling with the high quality capability of performing high metal removal roughing processes. In some applications it is also required to combine roughing and finishing passes. The single cutting ability combines high metal removal rate with good shoulder surface quality, no compromise in performance, and improved functionality.
Although the cost of cutting tools is only a small fraction of the total production cost of all parts, many users put tool cost issues with tool inventory in a prominent position. The square insert provides four cutting edges and also provides the ability to have the best cutting edge for each insert. But the square blade means a 90° fillet and has a limited range of applications for the combination of capabilities required for the new efficient shoulder.
New challenges for milling tools
The square blade requirement also represents one of the challenges when developing new high performance milling tools with a true 90° lead angle. High precision and elimination of any associated tooling errors and high metal removal capabilities are required. In addition, the angular accuracy must be several times higher than existing tools.
By relying on the existing CoroMill solution and at the same time developing a new conceptual direction, a model for the new square shoulder milling platform was established. Recent developments in methods and metrics related to the manufacture of new milling tools have supported this.
In order to achieve the goal of combining roughing and finishing tools, and also to use square inserts, it is necessary to provide a new cutting edge that can simultaneously produce end faces and square shoulders. At this point, favorable cutting action and high finishing capability must be established.
In any multi-tooth milling tool, the wiper edge of the cutting edge plays a crucial role because it is the decisive factor in the generation of the end face. The wiper strip must be longer than the feed per revolution of the tool to ensure a good surface quality. One of the problems with the use of the wiper belt is that the cutting edge is too long to increase the cutting force, so it is prone to vibration trends and higher power consumption and higher cutting stability requirements. For CoroMill490, how to have the most suitable wiper belt without inherent disadvantages is a challenge.
Based on the tool's large enough forward rake angle for the insert and the sharp positive rake cutting edge on the insert, the solution has been fundamentally developed with a lightweight cutting tool design such as the CoroMill490. Cutting the apparent basic tool geometry also indicates that the blade will negatively enter the material, which means smoother and increased strength. Tool accuracy also contributes to the implementation of the solution and guarantees a favorable cutting action, especially for finishing. The successful development of the unique new blade wiper belt and tooling features is not only a key factor in ensuring the CoroMill490's capabilities, but also a key factor in achieving the best metal removal rate per unit of power consumption.
Wiping edge technology
This technology is a core part of the milling solution. Since the wiper technology was developed by Sandvik Coromant for turning, it was further developed for the CoroMill490 wiper belt and the insert cutting edge for square shoulder cutting. When cutting, a tool with multiple inserts can easily generate some tooling errors through the transitions produced by each blade land.
There is also the problem of tool skew. All tools have a certain program skew during cutting, and the use of conventional wiper strips often has a negative impact on the resulting surface due to the sharp transition edges.
The multi-arc wiper design of the CoroMill490 blade wiper belt compensates for tolerances and angular misalignment of the cut. This not only minimizes the tendency of any tooling error, but also improves the accuracy of the face and shoulder surfaces. Between the different shoulders on the shoulders or the surfaces created by the different blades on the end faces, it is now possible to achieve almost the same effect, which in the past required further finishing.
Previous page next page
NICE Series - an Integrated Solution for Elevators & Escalators
Monarch's Integrated Solution combines control intelligence & inverter drive in one compact package.
An innovative solution for OEM`s who value reliable state of the art performance at a highly competitive cost.
A NICE new comfortable experience from Monarch.
NICE3000+ Elevator High Performance Integrated Controller
Comprehensive Function Features
Direct-To-Floor
By the principles of distance, automatically generate the smooth curves from start of parking, no crawling and directly stop in the levelling position.
Optimum Velocity Profile Efficiency
The elevator controller will optimise the velocity profile based on the desired travel distance demand instead of floor number.
Advanced Door-Opening
Under the automatic operation state, the speed during stopping is less than 0.1 m/s and the gate signals effective, system shorts door-lock signal through advanced door-opening module and then opens the door ahead of time to enhance the elevator efficiency
Category Door Open Holding Set-Time
System can automatically identify different time to keep the open calls to open the door, instructions to open the door, the door to protect open, delay to open the door and to open the door inaccordance with the setting time.
Re-levelling
This may occur when the lift stops at the floor station, and a large number of persons or goods enter or leaves. The levelling fluctuates because of the elastic deformation of elevator Wire Rope and the rubber. System is allowed to run automatically at the relevelling speed to the levelling station with the door open.
Self-Rescue Levelling
The elevator is in its normal operating state, but doesn`t stop at the correct level. If it meets the safety requirements to run, the lift will automatically run slowly to the nearest floor area, and then open the door.
Emergency Inertia Rescue Mode
Applicable for permanent-magnet synchronous motors only. When there is a power failure, system will short-circuit the motor phases through its contactor and produce a restraining torque when in motion. Based on the elevator inertia, the elevator will slide slowly and controller will open the elevator door when it reaches levelling position.
Emergency Self-Rescue Time-Out Protection
When elevator is at balance load or rescue device power capacity is inadequate. Long rescue time lapse is expected and accident may occur. This function enables the system to self-disable the emergency operation.
Elevator Position Auto Calibration
Each time the elevator enters the terminal floor zone, system will self-calibrate the position counter with respect to the 1st slowdown limit switch so that elevator over travel operation will be eliminated.
Fire Alarm Rescue Function
Enable user to preset the elevator designated homing floor when fireman mode is enabled
Monarch Control System,Lift Control System,Elevator Card Access System,Destination Control System
Suzhou Keffran Parts Co.,ltd , https://www.keffran-elevatorsmart.com