Tiles in the bathroom space wall must be filled. Tiles can resist the erosion of moisture, protect the waterproof layer of the walls, and at the same time, they are easy to maintain clean and beautiful for a long time. Households using ceilings should note that the part covered by the ceiling should also be covered with tiles in order to protect the entire wall.
Taoxiu Ceramics Jinyi Ceramics Qianghui Tiles
The wall of the bathroom is suitable for paving matt tiles, which can make people feel warm and do not puncture the eyes; floor tiles should use non-slip texture. General matt or shallow convex floor tiles, suitable for wet and slippery ground after bath.
Consider the slope: The bathroom floor should be 10-20 mm below the floor of other rooms. When laying tiles, pay attention to the flatness of the tiles, because the flatness and slope of the bathroom tiles will affect the flow of water on the bathroom floor, but also consider the location and size of the floor drain. Usually, the laying of bricks retains a slope of 1% water leakage, and the floor drain is the lowest for drainage.
Tile seams should be the same thickness, but also with the seams of the wall tiles.
Wet and dry divisions: "Dry and wet divisions" is a popular foreign design concept, namely the separation of shower areas from toilets and basins. Dry and wet areas can be distinguished by different tile materials and color varieties, so that the two do not interfere with each other and avoid the need to wipe out the tiles after the bath.
Links: Building Materials Selection Guide: How to Choose Sliding Door Hardware
Be careful home crisis kitchen bathroom is the focus
Building Materials Knowledge Space Room Home Kitchen Wall Tiles Kitchen Toilet Ceiling Bathroom Tiles Bathroom Doors Bathroom Wall Tiles Bathroom Door Size Bathroom Size Bathroom Ceilings Toilet Design Toilet Waterproof Bathroom Floor Tiles Bathroom Leakage Kitchen Tiles
A washer is a thin plate with a hole that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring, wear pad, preload indicating device, locking device, and to reduce vibration. Washers are also important for preventing galvanic corrosion, particularly by insulating steel Screws from aluminium surfaces.
Washers Categories:
About Washers,it is an accessory in fastener. We say it used to distribute the load of a threaded fastener.
it can be divided into several categories:
Spring Washers,Flat Washers,Square Washers, Rubber Washers. And our Non-standard Washers can be produce according to drawings and samples.
Technology and property:
We have ability to control the quality during production before sending to customers. We wish to do your best supplier of washers
Washers Purpose:
We are manufacture to supply our Bolts to our customers,We Have responsibility to give our best goods with good quality . So we will track all step to customers at all times. such as: products requirement,Technology and property, package, shipment, and files, and sales serve,
Welcome all of you to contact with us,we promise to give our the best We are improving as your supporting.
Square Washers, Fender Washers, Wave Washers, EPDM Washers
Ningbo Brightfast Machinery Industry Trade Co.,Ltd , https://www.brightfastener.com