Furniture is closely related to people's lives and affects people's quality of life and health. Therefore, before purchasing furniture, it is best to reserve knowledge in advance and learn tips for selecting and identifying various furniture.
Uniform solid wood furniture   Beautiful home fashion furniture
1, whether the furniture material is reasonable
Different furniture, surface materials are different. For example, the legs of tables, chairs, and cabinets require hardwood. They are firmer and can bear weight. The internal materials can be made of other materials. The thickness of a large wardrobe leg is 2.5cm. It is clumsy when it is too thick, and it is thin and easy to bend. Deformation; kitchen, bathroom cabinets can not be made of fiberboard, but should use plywood, because the fiberboard will swell with water, damage; table should be resistant to washing.
Wood was found to have insect eyes and drop foam, indicating that the drying was not thorough. After checking the surface, we must open the cabinet door and drawer door to see if the inside material is rotted. You can use your fingernail to lick it. After opening the door and smelling with the nose, if the red nose, glare, tears, indicating that the content of formaldehyde in the adhesive is too high, it will be harmful to the human body.
2, the moisture content of wood does not exceed 12%
The moisture content of furniture must not exceed 12%, the moisture content is high, and the wood is easy to warp and deform. When the general consumer purchases, there is no test instrument. You can use the hand-touch method to touch the underside or inside of the furniture without painting. If you feel damp, the moisture content is at least 50% and you cannot use it at all. Another way is to sprinkle a little water on the unpainted areas of the wood. If the pods are slow or not, the moisture content is high.
3ã€Whether the structure of the furniture is firm
Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor during picking, gently throwing and falling, sound crisp, indicating good quality; if the voice is dumb, there are buzzing noises, It shows that the combination of eyes and eyes is not tight and the structure is not strong. The desks and tables can be shaken by hand to see if they are unstable. The sofa can sit, if you sit on a move and squeak and squeak, a shake on the shake, it is a nail live, not much time.
The square table, bar table, chairs and other leg should have four triangular clips, play a fixed role, when the selection can be turned over to look at the tables and chairs, the bag cloth chair can be touched by hand.
4, whether the four feet of the furniture is flat
This point will be known on the ground after a flash, and some furniture will only have three legs to fall. Take a look at whether the desktop is straight and you cannot bow or collapse. The desktop is raised and the glass plate is twisted; the tabletop is recessed and the glass plate is broken with a pressure. Pay attention to the inspection of the cabinet door. The splitting of the drawer should not be too large. Pay attention to the straightness and straightness. The door cannot be sagged.
5, veneer furniture strict seams strict
Regardless of whether the wood veneer, PVC or pre-painted paper, should pay attention to whether the skin is smooth, whether there is bulging, blistering, patchwork joints.
When checking, you must look at the light and you cannot see it without flashing. Ash veneer veneer furniture is relatively damaged, generally only two years. For wood veneers, veneer veneers are better than peeled ones. The method of identifying the two is to look at the pattern of the wood. The veneer lumber has a straight and dense texture, and the peeled veneer is curved and sparse. Particle board veneer furniture, the landing part must be edged, without sealing the panel will absorb moisture, swell damage. General veneer furniture corners are easy to tilt up. When you pick, you can buckle the corners. If you buckle up, it means there is a problem with the glue.
6, see whether the furniture edge is smooth
The edge banding is uneven, indicating that the inner material is wet and seals will fall off in a few days.
The edge banding should also be rounded, not right-angled. Edges sealed with wooden strips tend to damp or crack. Plywood inlaid furniture, nails nailed at the bag, should pay attention to whether the nail eye is flat, nails and other places at the same color. Usually the nail hole is covered with putty. It should be noted whether the putty is bulging. If the bulge is not enough, the putty will fall out of it.
7, mirror furniture need to take a photo
Choose mirror-like furniture, such as dressing table, mirror, and mirror, and pay attention to whether or not the mirror is distorted. Check whether the back of the mirror has mercury or lining paper on the back of the mirror. There is no backplane failure. No paper or line, otherwise mercury will wear off.
8, the paint must be smooth
The furniture paint part should be smooth and smooth, free from saliva, wrinkle-free and flawless. Corners can not be right-angled at right angles. There should also be a lacquer inside the door of the furniture. The lacquer board is not easy to bend and it is not beautiful.
9, whether the installation of accessories is more reasonable
Example Check the door lock switch is ineffective; large cabinet should be installed with three dark hinges, and some can only install two; not on the line of the three; some of the silk, some cutting corners, only a screw, use it will fall off .
10, sofa soft bed to sit
When picking up sofas and soft beds, it should be noted that the surface should be flat and not uneven; soft and hard should be uniform, but not hard and soft; soft and firm should be moderate, not too hard nor too soft.
The method of selection is to take a seat and hold a hand. The spring will not ring. If the springs are laid out irrationally, the spring will cause the spring to make a spring. Second, we should also pay attention to whether the quilting line breaks, jumpers, and the density of the corner horn tooth is reasonable.
11, the color needs to coordinate with the interior decoration
Although the white furniture is beautiful, but it is easy to turn yellow for a long time, and black easy to gray, do not be beautiful at the time, to the end is not white, black is not black.
Furnishings Furniture Furniture Brands Samurai Lacquer Furniture Paint Glass Switch Hangers Cloth Sofas Drawers Cabinets Cabinets Doors Glass Cabinets Glass Door Furniture Glass Doors Glass Furniture Kitchen Doors White Furniture Glass Tables Glass Dining Tables Kitchen Glass Sliding Doors Wardrobe Cabinet Doors Mirror Bathroom door
We diviided the led light according to the using eviiroment. Most of our product is the commercial LED Lighting
Commercial lighting is a term used to describe lighting that is used in commercial spaces, including auto dealerships, distribution centers, churches, factories, offices, and warehouses. Unlike residential lighting, commercial lighting is made to withstand more abuse and has a longer lifespan.
While the focus of residential lighting is often on aesthetics, commercial lighting is task orientated. Commercial lighting systems are designed based on what the application is. For example, in an office-type setting, you may see task lighting, which illuminates specific areas where employees need concentrated light to be able to perform their jobs.
Cone Pendant Light,Cone Led Pendant Light,Hanging Lights For Living Room,Linear Pendant Lighting
Jiangmen Dilin Lighting High-Tech Co., Ltd. , https://www.jmdilinled.com