Acceptable elements of new house acceptance

After the housing decoration is completed, it is indispensable for acceptance. The owner accepted the project, and the standard was the decoration contract, the construction drawing signed by the owner and the relevant documents of the relevant state departments on the quality inspection of the decoration project. The specific acceptance was mainly from the following aspects:
Furniture: smooth lines, sealing lines, corner lines and panel interface dense, smooth, smooth sliding door cabinet drawer, handle symmetrical appearance.
Power lines: The circuit shall be laid in conformity with construction regulations and safety standards. The socket shall not be lower than 30CM from the ground. The ground of the three-wire socket shall be laid on the private line of the kitchen and air-conditioning lines. The main gate shall be equipped with a leakage prevention switch and the lamps shall be firmly installed.
Doors and Windows: The switch is free, the door frame, the window frame and the glass are well sealed.
Ground: The floor tiles are flat, with clear texture, uniform color, horizontal, vertical crosshairs, smooth floor covering, straight seams, uniform paint color, and no scratches.
Wall: The wallpaper is firmly affixed, the joints are tight, the pattern is complete, the pattern is anastomosis, the side seams are neat and free of burrs, the paint is even and smooth, the concave and convex feeling, no color difference, and no dust can be removed.
Water supply and drainage facilities: The water supply pipe has no leakage, the on-off valve operates well, and the drainage is smooth without leakage or water accumulation.
Paint: smooth paint, good feel, enough oil, no nails, scratches, burrs and color.

In short, the acceptance of new houses should be carefully and it is better to open all light sources first to avoid unnecessary troubles in the future.

Three trees Paint porch Renovation Switch lacquer Sockets Window decorations Glass bricks Chests of drawers Glass furniture Kitchen Doors Floor tiles Glass doors Kitchen glass Sliding doors

Magnetic Valve

A magnetic valve is a type of valve that uses an electromagnetic field to control the flow of fluids or gases. It consists of a coil of wire that generates a magnetic field when an electric current flows through it. This magnetic field interacts with a ferromagnetic core, which moves a plunger or armature to open or close the valve. Magnetic valves are commonly used in industrial applications, such as in water treatment plants, chemical processing plants, and HVAC systems. They are also used in medical equipment, such as oxygen concentrators and anesthesia machines. Magnetic valves are known for their high reliability, fast response times, and low power consumption.

Magnetic Valve,Magnetic Gas Valve,Electro Magnetic Valve,Magnetic Latching Solenoid Valve

WUXI KVC-VALVE , https://www.wxkaiweixi.com

Posted on