1, the main construction process
(1) Varnish construction process:
Clean the surface of the woodware → Polished paper → Polished powder → Polished sandpaper → Full scrape the first time putty, sandpaper polishing → Full scraping the second time putty, fine sandpaper polishing → Brushing oil color → Brush the first time varnish →Fight for color, refill putty, fine sandpaper polish → brush the second time varnish, fine sandpaper → brush the third time varnish, polishing → sandpaper polishing fade, wax, polish.
(2) Mixed color paint construction process:
First, clean the dust on the surface of the base layer, repair the base layer → level off with matte paper → paint on the frugal part → puttying on the bottom → dry oil → first pass paint scraper → polishing → brushing primer → primer Dry hard → brushing the surface layer → repair putty to repair → polish wipe the third time the paint brush brush the second time coating → polishing → third paint finish → polishing wax.
2, construction points
Clean oil coating construction specification
Polishing the base layer is an important process for painting the varnish. Firstly, dust, dust, and other impurities on the wood surface should be removed.
On the oil is also an important process varnish brushing, construction with cotton silk oil coated on the surface of the wood, rubbed back and forth by hand, rubbed oil into the eyes of the wood.
When brushing the oil, the brush should be easy and natural, and the finger should be lightly applied, so as not to move loose and not touch the brush.
When brushing, you must follow the order of multiple times, less time and less time, and the time required for the operation. Follow the order of brushing first, backwards, first, then first, then left, then right, first inside and then outside, and then brush. Vertical operation method construction.
Construction specification for wood surface oil mixing:
When processing at the grass-roots level, in addition to cleaning up debris from the grass-roots, local putty embedding should also be performed. Sanding paper should be ground along the wood grain.
Before painting the surface layer, apply a paint sheet (shellac paint) on the bottom of the joint where there is a large amount of color difference and lignanization. Should be painted on the grass-roots dry oil or mooring, brushing dry oil layer to brush all parts of the uniform, can not miss the brush.
After the base oil dries out, it is full of scrape the first time putty, dry after the sanding with hand-made sandpaper, and then make up high-strength putty, putty to pick the wire does not fall prevail. When painting surface paint, it should be polished with fine sandpaper.
| â–º Simple and practical paint coating construction Raiders | â–º Home decoration paint construction process and process |
| â–º Indoor paint construction process and points | â–º What are the key to indoor paint construction? |
| â–º Wall top painted with wall paint construction process | â–º Paint Precautions in Construction |
| â–º Analyze eight common problems in paint decoration | â–º 10 kinds of paint conditions for the right medicine |
| â–º Renovation paints 17 points for safety and quality | â–º Methods and methods for construction and acceptance of paintwork |
| â–º How to remove the taste of paint after home renovation | â–º |
Decoration construction knowledge brush paint paint interior decoration home improvement
Pendulum Impact Testing Machine
This impact testing machine is used to measure the impact resistance of plastic and rubber materials. It simulates real-life impact conditions and measures the energy absorbed by the material during impact.
digital izod impact testing machine, digital charpy impact testing machine
Dongguan Best Instrument Technology Co., Ltd , https://www.best-tester.com